Jump to content
SAU Community

replacement box filter


Recommended Posts

Guest Boxhead

im pretty sure you can get a nismo one, or possibly a HKS one, but i am not sure who you would approach about getting one...

and i rekon if you cant find a k&n fit in replacement your not looking hard enough, ive heard of lots of people using one...

but those things aside, im pretty sure rev210 is using a drop in replacement, ask him.

Is that size 282mm X 169mm ?

Same as N14 Pulsar and 200SX ?

If so I have 100 Jamex ones that I sold about 3 years ago and the guy went bust, so I repossed them. They are triple density foam, the ducks guts in airfilters.

If not let me know the size and I might have some.

If they fit, $35 each posted to anywhere in Australia, I'll take Visa or Mastercard.

Is there a NOTICABLE change in power when the filter is changed for a highflow drop in replacement? We pulled out the filter in the R33 for a test run down the road and noticed a fairly lage gain in power. (for test purposes only, we put back in straight away).

Would a good panel filter show almost as high of a gain as a boxed pod or no filter? It's hard to decide on what option is best as they both have their good and bad points.

Hi guys, 360's, so the Jamex ones will fit. We get a 6 rwkw increase on mild tune 200SX's with them, don't see any reason why you would not get around the same on a GTST.

They retail for $90 each so $35 posted is a bargain. Let me know if you want any. I will post a For Sale in the relevant place.

Guest silver33 guy

i was gonna go a pod filter originally but have been warned about the noise level. i like my skyline to keep a low profile - the huge exhaust already draws a few looks from the cops! if i don't get a performance gain i can 'feel' with the k&n, i may still switch to a pod filter.

oh so we are talking about panel filters here? of course there are drop in panel filters for skylines... k&n, blitz, hks, trust, apexi, redline... every brand has them. You can get the k&n or redline from Autobarn, or the other Jap stuff from performance shops... this shouldn't be an issue at all!

the challenge is trying to find a air box containing a pod filter like mugen do for hondas... they would work wonders, keeping out engine heat and saving you from a canary (provided cops don't open up ya box)

Hang on, let me get this this right............

In Vic your'e not allowed to change your air filter?

How do they know that the car wasn't complied with it?

Why do they think it's illegal?

Surely not too loud?

It's not a pollution issue, the air goes in, not out doesn't it?

Or is this just an excuse to give you guys a hard time?

If it is, someone should sue, find a car that's complied with a POD, cop a couple of defects, then sue them for harrasment. Win just one case and they will have to stop this sort of crap.

How does anyone know whether it is complied with the pod or not, the import papers don't show such detail... could have put it on afterwards... true air goes in, but more air comes out (that's what i heard). I also heard cos it could catch on fire in the engine bay, and i heard they like to give us a hard time.

Guest RedLineGTR
Originally posted by CR34TION

the challenge is trying to find a air box containing a pod filter like mugen do for hondas... they would work wonders, keeping out engine heat and saving you from a canary (provided cops don't open up ya box)

I know people that have been given fines and yellow stickers for even boxed pods, and epa usally open up the box to see if there is a filter or a pod (For r32 you can mod the box to house a pod) anways the best alternative would be a k&N panel filter, they have been proven to filter the air quite well compaired to other filters (also foam ones) they are easy to clean and last for ages. The price isnt to bad either. My 2 cents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good tips, will get on those tomorrow. When doing the maintenance I did move a few of those connectors around, and things that are old tend to not like moving around. (Like me).
    • Don't try it. It will be shit. Better chance of damaging the engine than gaining any knowledge about the old one. Maybe, but unlikely, especially if the O2 sensor is working. You can use NissDataScan to look at the stock ECU.   Cleaning the AFM is seldom necessary and seldom helps. The R35 coil & loom conversion should eliminate dud coils or plugs. But as you still have misses - look to the plug where the coil loom connects to the engine loom, and the CAS plug. Need quality connections there. Also look to injector plugs. And the AFM plug while you're at it. Also look to whether your injectors are clean and flowing evenly. Get them out and onto a testbench.
    • Good to know, I feel like I am in for a rollercoaster ride that looks like a sine wave. 
    • You'll fit right in. Acceptance is the first step.
    • Hey folks. I've been lurking and browsing the forum for a while, since I got into my head that I wanted a skyline. Having purchased an overpriced completely stock GTT, (only "mods" it has is HKS pod filter and catback) now that it became legal in the US, it was all glorious and sututu noises here and there. But then I wanted to do things right and went to do basic maintenance. After all the fluids, filters done, I did the spark plugs, that's when the problems started.. First the car started spluttering at around 4.5k RPM. Which I gapped down the new plugs and that solved the sputter there, but the car now always misfires at idle with pops when lifting off and shifting 2nd to 3rd. Similar to the issues in this recent thread. I've been banging my head against the wall, reading the threads here and trying suggestions for a couple months now, so decided to start this one to explain exactly what I tried and what is going on. The symptoms of the issue: Idle and low revs misfiring intermittently. You can hear the exhaust tone change and the shakes on the shifter knob. It happens frequently, but doesn't seem to have a rhythm to it. Pops when backing off throttle. It pops and or burbles almost feels like it spits fire when it pops. (Happens mostly in 3rd gear at around 2k RPM). When under load and after 6k RPM, it also pops when shifting from 2nd to 3rd. There's a ticking noise at around 2k RPM in 2nd gear going downhill, seems unrelated though but I am out of educated and downright dumb guesses. Not noticeable lack of power when putting the car into load. The attempted diagnosis and solutions: Unplugging coils when the car is running This did nothing to change the idling and tone shift for every cylinder. Checking the exhaust headers with thermometer They all are within what I'd say it is margin of error of the laser thermometer New spark plugs Tossed two new sets, copper, iridium and using the old ones, still misfiring, even re gapped to 0.8mm, still same thing. MAF cleaned with the "specific" spray cleaner No changes in the issues what so ever. Brand new loom and r35 coil conversion (was going to add the r35 coils anyway) car runs arguably better, still misfires, but seems like does less frequently. Placebo? Code 21 now being thrown, thanks nissan gods. Removed the CAS to check the shaft for play or anything. CAS seems all fine, nothing that indicates any issue, visually speaking. Things to attempted next: Ordered a new MAF (chinesium from Amazon, to be able to return regardless of result). Fuel with proper gas, maybe it is this California water that they sell as gas that is to blame? Plugin the link ECU and check the info using the built in base map. Go back to BMW and eat my rob bearing breakfast without milky oil mixture.   Do any of you have experienced anything like this or have any suggestion?
×
×
  • Create New...