Jump to content
SAU Community

I Want More Power Out Of My Rb20 What Mods Are Next?

Italiazr1

By Italiazr1,
in Engines & Forced Induction

 Share

Recommended Posts

Italiazr1 Proficient

Italiazr1

Posted
Posted

Ok i recently blew my little rb20 in my r32 but now im working on a rebuild for it

my car produced 238.8 rwkw @ 19psi before i cracked a cylinder and blew a piston ring

the car already had low compression so i knew it was coming The internals are stock.

i decided to rebuild the 20 instead of dropping in an rb25 because there is too many legal issues

With changing it over..

MY MODS

GT30 turbo 450hp

High mount stainless manifold

660cc denso injectors

3inch exhaust turbo back to hi flow cat

hybrid Front mount intercooler

fuel pump

K+N filter

external waste gate to screamer pipe

greddy electoric boost controler

i am going to strengthen the internals just so i can reliably run 20 - 22 psi

Im not sure what internals i should change and what to use i dont wanna spend over $6000

on the rebuild unless i have to

im getting forged pistons what else do i need?

also wanna try and get a little more down low torque as everybody knows how laggy my setup

is with the rb20 is there any other mods i can do to the engine while its all opened up?

someone said flowing heads? or plenum? i dont even know what these are?

what do you guys recon id like to do mods that you cant see just to be safe from cops

even now its already obvious but easy to change back to stock

Sorry for the long thread but id like help before i go see my mechanic and he tells me that ive gotta spend $10,000 to get what i want if you know what i mean...

Cheers Antz...

seamonsta Contributor

seamonsta

Posted
Posted

Why not get an RB25 or RB26 crank/rods and stroke it baby, more torque and the cops won"t pick it. You also have a full reco engine, not a second hand 100,000 km RB26 time bomb!

Just my 2c worth

Roy Grand Master

Roy

Posted
Posted

There is still hope regarding that bottom end. Still chasing to see if its in the back of the workshop. But realistically...its too much money to build your RB20. For $600 you can get a wrecker RB20 with warranty. I have used a wrecker SR20 (was a great engine) and my current wrecker RB20 that is makign more power then yours and i dare say i drive mine harder then most owners...and mine is in perfect health.

The trick is to get the thing tuned by a person that knows what they are doing. (Thats not to say your tuner doesnt)

Italiazr1 Proficient

Italiazr1

Posted
  • Author
Posted

thats all good but if i drop in any other engine other than the rb20 and i get epa'ed im screwed

Aren't i ????

how far do they look into it if i do get epa'ed?

you cant just put anything in it and hope that you dont get done for it.

my head is done in............................. i just wanna drive my skyline again

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
thats all good but if i drop in any other engine other than the rb20 and i get epa'ed im screwed

Aren't i ????

how far do they look into it if i do get epa'ed?

Basically... if they catch you... your f**ked to put it bluntly :)

There is no way around it if you wanna be "legal-ish"

If you want power upto 260rwkw, its RB25.

If you want more than that, its RB26 if you ask me.

RB25 limit is 260rwkw because after that, your outta options using the stock size turbo, and i was pinned for a GT30 on RB25 :thumbsup:

RB26 is the the only way if you want to avoid hassles/fines etc over 260rwkw. I've been there, hence i just went RB26.

When you do the costings up of a potential EPA, and what its costs to go back to stock... its simply not worth it and its MORE than the cost of an RB26 conversion

Italiazr1 Proficient

Italiazr1

Posted
  • Author
Posted

ok thats what i wanna know. i will port the head then and put cams in.

Maybe NOS next time i blow it up what you recon?

anyway boys thanks for the help ive decided what im doing i will let you's all know when its done.

hopefully have a reliable 250rwkw with not too much hassle from cops

cheers

paulr33 Grand Master

paulr33

Posted
Posted

nos is probably the eaiest way to get more power and response

legality issues of it? yeah cos exteranl gate, screamer, aftermarket ecu, bigger turbo etc are all legal modifications

fEkuaR Experienced

fEkuaR

Posted
Posted
nos is probably the eaiest way to get more power and response

legality issues of it? yeah cos exteranl gate, screamer, aftermarket ecu, bigger turbo etc are all legal modifications

Im not suggesting that these other modifications are legal. But the risks involved with nitrous would far outway the risks involved with an aftermarket ECU.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      LOL.... a good amount of people (not all) on that continent seem to know everything and like to measure things in bananas, football fields, statue of liberties instead of the metric system lol.
    • dawhitehonky
      M35 Aftermarket Fuel Pump

      By dawhitehonky · Posted

      I assume the modules are similar enough, so if you've had no issues I don't see why I would. I have tried to find a wiring diagram for the FPCM / fuel pump circuit, but I can't find it anywhere. Otherwise, I would just do some wire cutting and joining at the FPCM and give the 12 V supplied to the FPCM directly to the pump instead. If you know anyone that could help with wiring diagrams, I'd be very happy  
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • GTSBoy
      Rapid-fire squeaking/creaking from rear suspension

      By GTSBoy · Posted

      Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
×
×
  • Create New...