Jump to content
SAU Community

Recommended Posts

I currently drive a Subaru WRX 99 Model which i love to death however I have discovered the hard and expensive way that the gearboxes are complete crap even when running a stock clutch. I replaced the gearbox the day after I bought it ($3500) and now my new gearbox has just died after letting a friend drive

Im thinking of selling up and moving over to a Skyline or something Nissan.

Can anyone tell me if Skylines have any renound weaknesses? Do they have strong manual transmissions?

Has anyone driven a Subaru and a Skyline?

Link to comment
https://www.sau.com.au/forums/topic/164695-skyline-weaknesses/
Share on other sites

I had a 2001 WRX bugeye,definite problems with clutches(I had heavy duty),for a performance car worst seats Ive ever

sat in,some people say I went backwards when I bought a R33 Series 2 auto,that was my choice and Im extremely happy,excellent ride,no turbo lag like the WRX,excellent engine to work on,plenty of room under the bonnet,and the added bonus is I havent had any unwanted attention from the boys in blue(followed home a few time by undercover cops when I had the wrx,maybe something to do with ram raids in my area ).Photo of WRX attached

Picture1811.jpg

Thanks for that!

With my budget I think im gonna see if I can find an R33 GTR for around 25K...Is this possible?

I like the idea of a twin turbo. I hear the R33 GTR has a kick arse bottom end, how is the stock diff and bottom end, if i want to one day make 300rwkw?

I want to drive a weapon!

Would be wary of an R33 GTR for $25k... Stock diff is very strong, bottom end is good unless you're planning on circuit racing with sticky tyres, start running into oil control problems. Have a look for Sydneykid's oil control thread for more info on that.

Just do a search under "common problem" and you'll uncover other things

I disagree with that!! In my (limited) experience with Nissan imports (n/a 2L silvia, turbo 2L silvia, turbo s2 stagea) there have been no "common problems". Almost every problem I've encountered has either been a failure that can happen to any car (and does) or a maintenance issue.

However maybe if you do a search for 'common problem' you'll find that there really aren't any.

Skylines aren't perfect, everyone knows they have some weaknesses, but at least in stock form they have proven to be generally a rock solid performance car. They also have loads of performance potential with a lot of easily available upgrade parts.

Reliability for a modified skyline has a lot to do with how realistic you are about your power goals and how much money you are willing to invest in quality parts, and supporting mods.

At the very least you'll find that Nissan gearboxes are generally quite strong. :3some:

However there will always be a few exceptions to every rule.

well ok, i think you guys are a bit biast, so am I.

The gearbox are dam strong, but synchros suck.

Stock clutch will need an upgrade at 200 rwKw.

The S2 Turbo i find is great, it has lived at 15 psi for ages, and no issues, pulled 217 rwKw. It's all in the tunning.

THEY GUZZLE FUEL, i have been in 5 different ones, and they all eat fuel.

Unless you can do a lot of things yourself, they will be expensive for others to fix, they tend to have expensive genuine compopnents, so unless you do the leg work yourself, your up for big bucks.

EXHAUST MANIFOLD, i have not found a skyline yet, that has not had number 1 and 6 manifold snapped off.

S1 Interior scratches up SOOOOOOOOO easily.

The carpets will get holes in then in a day if cheep carpet matts are used

Other then that, these cars ar up to 13 years old, so thta means that all will have some issues. BUT buy wise and you will be ok.

well ok, i think you guys are a bit biast, so am I.

The gearbox are dam strong, but synchros suck.

Stock clutch will need an upgrade at 200 rwKw.

The S2 Turbo i find is great, it has lived at 15 psi for ages, and no issues, pulled 217 rwKw. It's all in the tunning.

THEY GUZZLE FUEL, i have been in 5 different ones, and they all eat fuel.

Unless you can do a lot of things yourself, they will be expensive for others to fix, they tend to have expensive genuine compopnents, so unless you do the leg work yourself, your up for big bucks.

EXHAUST MANIFOLD, i have not found a skyline yet, that has not had number 1 and 6 manifold snapped off.

S1 Interior scratches up SOOOOOOOOO easily.

The carpets will get holes in then in a day if cheep carpet matts are used

Other then that, these cars ar up to 13 years old, so thta means that all will have some issues. BUT buy wise and you will be ok.

Agreed on the exhaust manifold its just so common. I wonder if its poor build quality. I have asked a few supra owners, and they have no idea what im on about, as they have not have such problems . Oh, and faulty gauges too sometimes.. Really makes me wonder the quality build on Nissans

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...