Jump to content
SAU Community

Recommended Posts

Hey guys, need some help, Got my GTR imported and the tryers are shagged..

It has 255/40/17 the whole way round..

Can any one tell me if the R32 can fit a 275 tyre the whole way round???

Yes the car has coilovers..

Ahh, and if any one knows any one thats doing a cheap deals on tyres ant the moment that would be great!!!1

thanks guys.. and girls!! :P

Mark

Link to comment
https://www.sau.com.au/forums/topic/165225-r32-gtr-275-tyre/
Share on other sites

275 in 17 will be an extremely expensive tyre (unless you buy linglongkangwhatevah garbage). Just get 235-255 and be done with it (the 275's may buzz the guards on a lowered 32 anyway if you have lower offset wheels).

goto whatever your local tyre shop is and have a chat to them...

(don't buy whatever they try and sell you straight up)

you mentioned you had 17" rims?

the width of the rims will play a large part in what width tyre you can run

as well as the offset/s as to where the rim/tyre is positioned within the guards.

i believe 9" is the minimum wheel width for 275's.

quality of tyre is just as if not more important than width though.

if u look at what u need the car for and what u want to do with it then a tyre shop can get u started.

after that do some research on net and take a look at the sticky in susspension, braking and tyres.

good luck with it - 275's FTW :nyaanyaa:

they will be sitting outside of the guards i have 265's on the back of mine atm there to wide the rims are x10 to, i had to raise the suspension for them not to scrub, im def going back to 245's or 255's take my advice and dont do it. :nyaanyaa: i took the advice of a tyre fitter supplier, they dont have a clue.

Edited by 95SKY

depends on what you want the tyres to do.

for track i got a set of BBS wheels 18 x 8 255 all round

For street i got 19 x 10.5 Volk rims with 285 all round. Rub i bit up front prolly need to raise the ride height a bit and would be ok.

For drags i need some stock 16 x 7 GTR rims.

So basically nothing is gonna do everything well, just need to choose what there for. the 19 x 10.5 have huge dish and look sweet but really there just rice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...