Jump to content
SAU Community

Recommended Posts

  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Z32 Air flow meters

I have Z32 Air Flow Meters. I have an orange sticker on each AFM with 22680-30P00 A36-000 N62 printed on it. A Bosch cross reference document (see the link below) shows that both Bosch part numbers F00E000202 and 2268063107 are replacements. I am also told that they are cheaper than the Nissan part. There's a Tutorial on the Skylines Australia forum (see my main page for the link) on how to connect the wiring.

Z32 Air flow meters

I have Z32 Air Flow Meters. I have an orange sticker on each AFM with 22680-30P00 A36-000 N62 printed on it. A Bosch cross reference document (see the link below) shows that both Bosch part numbers F00E000202 and 2268063107 are replacements. I am also told that they are cheaper than the Nissan part. There's a Tutorial on the Skylines Australia forum (see my main page for the link) on how to connect the wiring.

Spot on Paul, the Bosch units are around half the price of the Genuine Nissan unit.

AVCR, Defi Gauge, and seperate external gauge all read 1.2 bar - no boost leaks evident.

Try conecting one of the gauges to the compressor outlet and comparing the readings with another gauge connected to the plenum. You should see a slight loss across the intercooler and the pipework, a couple of psi only.

:P cheers :(

Rang the sponsor today and they have no hesitation in me sending back the AFM for a warranty replacement. When i purchased this, it did not arrive in a bosch box, rather, just a brown generic box, but in a clear plastic bag. The sponsor stated that a few of these had been returned last year due to the exact same reason of maxing out to early, and some customers weren't happy that they were received one without the genuine box. There is a 12 month warranty on the AFM, but I guess i'm one of the odd few, that just never got around to installing it until now. I've been advised that the replacement AFM will also be another new genuine item, but will be delivered with the genuine bosch box.

For those that asked if the right selection was made in the Power FC, yes it is set for Z32. We put the stock afm back on, and it operated at around 4.7 approx same power output.

No, there are no "China copy" AFM's on the market - That really is a stupid rumour :santa:

As far as I can tell, there was an early batch of Bosch AFM's that had some problems. I bought a pair of them for my GTR and when I discovered that they were misbehaving during tuning I contacted the shop I purchased them from and they confirmed that the issue with their behaviour was a known problem and had been taken up with the company that supplies many dealers in Australia.

Both of them were promptly replaced under warranty without question :thumbsup:

HI MY NAME IS "IM WRONG"

The mesh was exactly like this when it arrived. Other than that it looks like all the rest I've seen on here. Sending it off for replacement tomorrow.

1818103ri3.th.jpg1818105yb8.th.jpg1818108uy6.th.jpg1818115nt4.th.jpg1818116at1.th.jpg

1818117ua2.th.jpg1818120kj8.th.jpg

you are a value to community, thanks for taking the pics

ill put them on my site

HI MY NAME IS "IM WRONG"

Rather than come off like a wanker, why don't you try adding something a little more constructive to this thread :action-smiley-069:

The AFM's that I picked up for my GTR, came from the same dealer that _8OO5TED_ and silman's AFM's came from and were in the same white box with the mesh section that didn't look 'brand new' as I would have expected. I know

I was suitably unimpressed when my two new Z32 AFM's maxed out at 300awkw :P

I just phoned the shop that I bought them from yet again and they confirmed that the supplier that provides the Bosch AFM's to a number of shops around the country is the biggest Bosch distributor in Australia and apparently one of the batches they received came in these white boxes like mine did. They tell me that since raising the issue with the supplier company, all future deliveries they have received have come in original Bosch boxes and packaging and apparently they have had no issues since.

As far as I can see there no solid proof as yet to suggest that these bad ones actually came from China so for everyones sake I think its best that we all stick to facts rather than assumptions.

I guess the main thing to be weary of is make sure you get full warranty when buying, and purchase from a reliable dealer so if something should go wrong you can have it addressed immediately

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...