Jump to content
SAU Community

Recommended Posts

I have recently upgraded my skyline with full exhaust and electronic boost controller,

I am interested in more power though and am considering in a turbo of capable of higher pressure and FMIC.

There are turbos on ebay for around $300 and FMIC for around $300 aswell, Has anyone purchased 1 or I would like some opinions?

Link to comment
https://www.sau.com.au/forums/topic/165424-turbos-and-intercoolers-from-ebay/
Share on other sites

the cheap generic 600x300x76mm intercoolers are fine. Im sure LOTS of SAU'ers use them.

a $300 turbo on the other hand, not so great.

Yeah I have been reading on forums and seems that FMIC dont matter 2 much.

But what turbo then 2 buy I dont want 2 fork out 2 much any suggestions??

what motor is it? RB20 or RB25?

if your looking to do a turbo upgrade, there are more things to factor in than just a cooler upgrade.

the ecu would need to be modified or replaced, possible injector upgrade, a larger fuel pump, a stronger clutch, air filter upgrade etc etc.

i would rather buy a second hand brand name turbo then a brand new Ebay turbo.

$300 for the turbo, then 2 weeks later...$900 for rebuilding the turbo...OR possibly worse if the front wheel went into the engine...

can anyone point me in the way of buying a cooler my skyline, have only had it for around 3 weeks looking for somewhere to buy one, but a decent one

http://www.skylinesaustralia.com/forums/in...howtopic=138738

there are items on ebay, and there are items on ebay

some are completely dodgy items :

scams, electronic superchargers for 75HP which are a fan in the intake pipe on an n/a car

those 5HP resistors etc

600HP turbos for $600

not hks apexi nismo greddy tomei ashtray

dodgy traders

then there are good bargains well well know traders and shop "runners"

usually have really high feedback and sell good stuff just cheap

without the added bullcrap of running a normal retail store

choose carefully but remember there are lots of bargains

just be careful, double check, ask, lots of reading and check their feedback

I have RB25, I wouldnt mind 250rwkw, What are the capabilities of stock injectors?

I was told i should be able to get upto 15psi on stock injectors and ecu.

for that power you will need

- ECU - PowerFC, wolf, halteck, autronic (to remap fuel etc)

- New fuel pump - about a 500hp internal will be good

- Turbo, not an ebay turbo, a high flowed will be best as it will bolt straight back in so you won't need a new manifold or dump pipe and existing imtercooler

piping can also be used

- intercooler, hybrid are cheap and a decent brand

- injectors (recoomended)

with the injectors they should be able to to achieve that but you will need a new fuel pump and fuel pressure reg.

but keep in mind the duty cycle of the injector will be above 85%, so an injector upgrade will be good to lower the duty cycle.

550cc nismos are a direct replacement

Edited by 33_skyline

somebody should buy them and see how they go ?

there onli 300 bucks and they could onli blow not alot of money realli?

i mean hell most of the shit we pay for in the high labour costs, thats made in aust anyway

I have RB25, I wouldnt mind 250rwkw, What are the capabilities of stock injectors?

I was told i should be able to get upto 15psi on stock injectors and ecu.

hrms, not too sure if the stock ecu can handle 15psi...

anything over 12+ psi and your in rich and retard territory. though some sau'ers are lucky to get 14psi with no rich and retard on the stock ecu.

just my two cents...

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...