Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Been good reading guys, thanks.

If i hit 250 with a nice fat curve thru the middle, I'll be pretty damn happy :)

Just so you know, it'll be :

Z32

s15 injectors, 450cc

Tomei Fuel Pump

Power FC

FMIC

Zorst/Pod

I'll post it up soon enough....

  • 3 weeks later...

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

Thanks mate much appreciated. Slowly getting there.

Does the GTRS have a T3 flange? I was doing some searching on horsepowerinabox and from what i can figure they reckon the GTRS is for the sr20det's and the GT3076 would be better for the rb25det's?

The GT3037/3076 is an exceptional turbo for its HP range. It features a .6 surge slotted comp cover and a complimenting turbine/comp wheel ratio, making it a great bolt on upgrade for the 2-3 litre range engine.

This unit has a lot of flexibility in offered houisings. It can be supplied with a T25 .86 internal housing, a T3 .63 or .82 external gate housing and a recent edition is the option of internal gate T3 in .63 or .82 (these units are more expensive and subject to availability at the time). Usual ultra reliability and superb response from the Garrett ball bearing design.

Great upgrade for RB20/25s and other 2.5-3 litre's looking for some serious power.

So the GTRS is the GT2535?... Is this the most popular street turbo for the rb25det, How much is it?

I have a:

Apexi power FC

E-boost

Apexi turbo timer

3" exhaust from turbo back

Front mount intercooler with custom piping

Custom cold air intake

Custom intake plenum

80mm throttle body

post-28112-1179133304_thumb.jpg

Im getting injectors the same time as the turbo as they are maxed out now.

Will i need the Z32 afm or will it be ok?

Would it be wise to get an aftermarket exhaust manifold? if so top mount or low mount?

Will the set up i have reach around the 250kw atw.

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :P

On the other hand; Very neat and clean engine bay, looks awesome :)

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

Oh, and why are you gettin ganother one?

Wouldn't you just rebuild the one you have? or is that what you mean?

I lost my dyno (it was 339hp but whos counting), but supporting mods were

FMIC

Fuel Pump

S-AFC-II

Split dump, 3.5" front pipe, 3.5" de-cat, 3.5" exhaust

16psi on EBC

I sold that one, i got pissed off with spending $$ on car, but now i got the bug again and bought a trusted/renowned great turbo :D

That said, I'll have this new one installed soon so I can post a dyno then :)

The GTRS is NOT the GT2535. But due to the very similar power delivery, HKS dropped the GT2535 once the GTRS was released.

Are you claiming to have 250rwkw with those mods, on the std turbo? If so go to another tunner, as he is pullin' your chain :)

On the other hand; Very neat and clean engine bay, looks awesome :laugh:

The GTRS is rated at approx. 380hp

The GT3076 is rated at 500hp

Two totally different turbos with different power curves. The GT3076 is also a great turbo, but will be laggier than a GTRS, on an rb25. In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine.

he is asking once he gets the turbo and injectors done could he expect 250rkw out of the new set up.

Edited by fEkuaR

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :laugh:

post-28112-1179220218_thumb.jpg

The GTRS is a fair bit more powerful than the GT2535 hey.

Do they both spool up in roughly the same time?

Also can u get the GTRS externally gated as apose to internally? http://www.slidingperformance.com/catalog/...products_id=312

Pro's and con's?..........

There is a fair bit of info about the GTRS if you look around.

the best description I've heard is 'It has the response of a HKS2530 with the top end power of a HKS2540'

HKS2530 - supposed ot have ripper spool up as it;s quite small so you can't argue with that, but the top end, boost would drop off off as it choked and can't cope or whatever.

HKS2540 - Ripper top end but an absolute dog for lag etc.....only suitable for drags...

So combine the 2 and you have the GTRS

So, can we now keep this thread to be HKS2535 oriented?

Thanks peeps....

Nahh i got around 200rwkw now but i ment when i get the mods will i have around 250 like fEkuaR said.

Al

"In fact i have just purchased the GT3076 to replace my GTRS, as i am doing an RB30 coversion and the GTRS would have been too small and would have resticted the engine."

So what are u doing with your GTRS? selling :sleep:

Sorry, my bad.

Am selling, but already have 2 potential buyers.

Since the turbo is less than 5,000 km old, i do not intend to give it away :P

  • 4 months later...

HKS 2535 is now tuned up to my satisfaction and it's a wee rippa.

Made 245.9rwkws on The Hitman's dyno which i don't think is a happy-reading dyno.

See the results in the dyno thread.

Spools up nicely and sounds great.

Vote 1 for HKS2535

And another vote for the s15 injectors which have done the job easily with more room to move(currently hitting about 80%)

I'm now guessing these babies are good for 270-280 rwkws.

That's it, anymore mods will be more along the lines of sell and by a Mitsubishi Mirage...tehe (seriously)

But I'm going to enjoy this one for awhile yet

Cheers guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...