Jump to content
SAU Community

Recommended Posts

Hi all

I'm thinking about putting a RB20DET into my VL Calais and use the RB30 block from the calais for the RB30DET conversion into my 32. I'm just wondering whether the RB20DET will go into the calais without too many problems. Thinking about chucking in the gearbox from my 32 aswell but thats a big maybe.

Is there any mounts that need to be adjusted or what not to get the RB20DET in the VL engine bay? And if anyone has any ideas as to what other mods need to be done to get a engineering certificate that would be great

Cheers

Link to comment
https://www.sau.com.au/forums/topic/16600-rb20det-into-a-vl/
Share on other sites

Any RB series engine will bolt up to the VL easily, don't put an RB20 in though as they seem to be to slow in VL Calais's, a full RB25 would be good or use the RB25 head on the RB30 block, but I doubt the RB20 head will work well with the RB30 block.

Link to comment
https://www.sau.com.au/forums/topic/16600-rb20det-into-a-vl/#findComment-342188
Share on other sites

Well what I mean is a(RB20) 13.2 with a high flowed turbo running 15psi(was it even a Calais), compared to my Calais(RB30) with stock turbo, ECU, injectors, pump, with a tiny AVO intercooler and only 2.5" exhaust running 11psi pulled 13.5, there's no point spending money on an RB20 when you can simply buy the turbo'd VL in the first place and then spend the $2-3k that you would on the conversion into perf mods on the RB30ET and you'll have a 12 sec car. Remember 9 sec VL's still run single cam, but if you feel that you want a newer hi-tech twin cam motor for your VL then really you must go RB25 or 26 because the RB20 isn't much newer than an RB30 and it doesn't have the torque on or especially off boost to pull around a 1450kg CALAIS.

Link to comment
https://www.sau.com.au/forums/topic/16600-rb20det-into-a-vl/#findComment-344281
Share on other sites

Also I might add the fact that many R32 owners brag how there Skylines are soo much lighter than an R33 and that we need the RB25 coz it's such a heavy car and that a mod'd 32 can beat a 33 coz of the weight factor, well a VL Calais is heavier than an R33 and yet you still say the RB20 is ok for it?

Link to comment
https://www.sau.com.au/forums/topic/16600-rb20det-into-a-vl/#findComment-344295
Share on other sites

hehe

I'm not actually building this car as a ongoing project and i'm not disputing the fact that the calais'are heavy and the rest of it. I'm doin this to get abit more money out of the SALE of the calais because the original motor in it is pretty much dead. I have a RB20DET R32 as a daily driver and want more power so why not use the block from the RB30 calais for the RB30DET conversion into the R32. That would leave the calais without a motor and a RB20DET engine in the garage. :D

Since 5 speed manual turbo calais'are pretty scarce around here i thought the conversion would be the perfect thing to do rather than selling the front cut by itself :)

I just thought i'd let u guys know this to clear the air. This wont be my project car but am still wondering whether the conversion is difficult or not.

Cheers :)

Link to comment
https://www.sau.com.au/forums/topic/16600-rb20det-into-a-vl/#findComment-344854
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...