Jump to content
SAU Community

Recommended Posts

Sorry mate, just thinking about it.

My first price of $200 was way too high, $125 for the entire assemblies, at that price, not really willing to separate.

Hey Prophet. Did you get my PM regarding the E-brake cables?

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Hey Prophet. Did you get my PM regarding the E-brake cables?

Sorry mate, must have missed it. Send me another one if you still need the gear.

Gearbox and tailshaft gone.

Wheels gone.

Brakes (hubs and calipers) gone.

Exhaust gone.

Instrument cluster gone.

Gearknob gone.

Still plenty of other stuff left guys and girls, make an offer on any part, all reasonable offers will be seriously considered, theres no point just having it laying around.

how much for your Front Right Hand Side headlight lookn from front on

and is it disclooured

pics plz

By front headlight, you mean drivers side headlight? Sorry you've confused me a bit.

Drivers side is in good condition, no discolouration, $175.

Passenger side is useless.

You may have missed my post???

Sorry yeah mate, I did miss it. Have you got a photo of it? I'm not quite sure what you're talking about, I may have it in my bucket of goodies laying around.

Have you still got the AFM and plug. If you have how much do you want of it posted to adelaide. If it's the three pin type i will only need the plug.

Thanks

Yeah mate I've still definitely got the AFM, I'll have to see if I can find the plug, alot of the loom got thrown with the car to scrap metal.

I'll get back to you when I get a chance to have a look.

hey also forgot to mention i need the rear brake rotors and pads if you still have them (at least need the rotors) will pick up tomorrow afternoon if you still hav them for the right price...

hey also forgot to mention i need the rear brake rotors and pads if you still have them (at least need the rotors) will pick up tomorrow afternoon if you still hav them for the right price...

Sorry mate, rotors and calipers for both front and rear have been sold.

I've managed to pull apart the engine completely to see what the problem has been for it to not turn over.

Turns out 2 rods are bent, top end is in good condition however.

Bottom end would suit anyone looking for a project building the engine from the ground up, the 2 damaged cylinders will not need to be rebored, just honed.

Considering all offers on either end, willing to separate if the price is right.

Edited by ProphetR33

hi mate, i just spoke to you on the phone regardaring the drivers side door for $150 to pick up on saturday. i forgot to ask you, does the switch and the motor work ok, or are they wrecked?

Cheers mate

hi mate, i just spoke to you on the phone regardaring the drivers side door for $150 to pick up on saturday. i forgot to ask you, does the switch and the motor work ok, or are they wrecked?

Cheers mate

The door was working fine before the crash, have since used the window without problems when it was on the car. Everything seemed to be working fine, it shouldn't give you any problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...