Jump to content
SAU Community

Recommended Posts

was at a mates cusins house the other day and he was showing off his new r34 GTR. he was reving it on idle and he was doing that thing in 2f2f where the R34 is pumping out nos gases into the crowd.

absolute stunner looked insane. i was wondering what kind of work is involved in doing this and how expensive?

ill try get a vid of it next time, honestly hottest thing ive seeen.

if u guys dont know what i mean check this vid out (i know its real corny but it gets to the point)

http://www.youtube.com/watch?v=C27BjrjDkks...ted&search=

Edited by anDru
Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/
Share on other sites

I still don't get the point of venting valuable nitrous to the air, other than bleeding the system of air... and if it was supposedly only for that, then it shouldn't last that long anyways.

If you want it purely for wank factor, then just get a compressed tank of anything (diving tanks?) and plumb it up with a solenoid... then when you press a button it'll "vent".

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093269
Share on other sites

Get a Co2 purge kit mate, same as nos but not as costly .. obviously is just tanks of co2 linked to a purge/overflow hole which blows it out the side ..

nos wont be in the system so u have no nos benifit.. but u have the wank ability and thats whats important rite :P

AKA fake nos

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093520
Share on other sites

was at a mates cusins house the other day and he was showing off his new r34 GTR. he was reving it on idle and he was doing that thing in 2f2f where the R34 is pumping out nos gases into the crowd.

absolute stunner looked insane. i was wondering what kind of work is involved in doing this and how expensive?

ill try get a vid of it next time, honestly hottest thing ive seeen.

if u guys dont know what i mean check this vid out (i know its real corny but it gets to the point)

http://www.youtube.com/watch?v=C27BjrjDkks...ted&search=

eh? last time i checked this wasnt ns.com :wave:

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3093902
Share on other sites

its a purge kit for the nos!

kind of pointless if you dont have a nos system althou if you just wanted it for looks, you could buy the purge system and hook it up to a c02 bottle and it would do the same thing. add some die into the line and you will get the colour too

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094232
Share on other sites

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

Its illegal just to have nitrous in the car

Let alone use it or try and get 15yr old girls excited

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094522
Share on other sites

how much are these purge systems? any idea wat sort of ppl can do this? also i know its illegal to have NOS injected into your car, but is it legal to vent it like this?

It probably isn't illegal to vent it if it isn't hooked up to the engine at all, the main problem is that it is a waste of NOS (which, correct me if i'm wrong, isn't cheap). If you are going to all that effort and spraying out proper NOS, wouldn't it be better to hook it up so it actually does something, then when people call you an absolute wanker, you can whip out a vid of you actually using NOS on the track or something.

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094855
Share on other sites

so how do you transport it?

Law:

"a road registered vehicle fitted with nitrous oxide must have the

system modified so that the bottle is properly secured in the brackets

provided and isolated from the engine (disconnect the main braided line

from the bottle), and the supply line to the engine is physically blocked

off with an approved A-1 Performance disarming kit whilst the vehicle is being street

driven."

Link to comment
https://www.sau.com.au/forums/topic/167170-nos-spray/#findComment-3094871
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...