Jump to content
SAU Community

Recommended Posts

:D Hey guys, since buying the R32 gts-t about a month now i seem to be encountering a few problems.

#1 seem to crank the car more than once to get it to turn over,if i crank it once and give it a lil foot on the

gas it will start fine. If i don't give it a foot it will shake and jerk then stalk without the engine even starting

up yet. When i hear the sound & running of the fan thats what im refering to when i say engine not starting up

yet.

#2 The car seem to run good every so often,but when it stalls on you like this it gives u the shits.It will stall at

red lights, stalls while the turbo timer is running even stalks sometimes when im driving. Most of the times i

feel it in my gear down shifting,gears doesn't feel like its been down shifted and when i come to a stop then

looking at my rpm its reading way over the 1000rpm mark, then splat the car stalls. The revs will go pass

1000rpm then drop down and stalk. Down shifting gears is suppose to feel like the car is slowing down and

u can hear the engine doing that, When the revs is high and im down shifting i don't hear that, come to idle

at red light if revs over 1000rpm it will drop then stall.

#3 Why is my car jerking alot now . The car seem to jerk alot when i give it. I ease off the gas and try again it will

jerk. Jerk violently sometimes. The other night i wanted to give it so i down shift to 4th the car didn't go

nowhere,the revs didn't move.So i couldnt even down shift to see how the car would go.Felt like

some kind of blockage. Could it be something to do with the sparkies i just put in. I've read about how you

suppose to regap them,but not to sure if it is the sparkies.

Yeh sorry guys for blabing on,i apologies but i do need some help . If anyone could help out that would be

great.thankz guys

Link to comment
https://www.sau.com.au/forums/topic/168242-problems-with-my-r32/
Share on other sites

#1 is a common problem. A lot of R32 owners have the same cold start problem (including my self)

Clean your aac valve to see if this fixes your idling rpm.

Also do you have a blow-off value? Have heard this causes issues on idling too.

yeh thankz guys for all your advices and help. Going to borrow a mates afm and see how she goes from there.I've yet check the acc valve but will check that out also. I'll keep you guys posted on the progress. Much appreciated guys

  • 2 weeks later...
  • 6 months later...

1 - it seems that most 32's have the same cold start issue. mine included, you learn to live with it after a while. cleaning the aac valve and iac valve helps

2 - like others have said it's probably the afm dying. if you have an atmo bov that could be causing the problem too. get a std bov and see if that fixes it

3 - could be your afm again, could be your coilpacks. is it misfiring (exhaust making popcorn noises)? whats your spark plug gap? it could be an air leak. Check your intercooler and turbo piping for any leaks, make sure the hose clamps are tight and the pipes/hoses firmly seated.

My car used to jerk + misfire etc on boost but drove around fine off boost, turned out to be the tiniest air leak from a slightly loose hose clamp that grew on boost but sealed off boost.

the revving over 1000rpm then stalling could be because the motor is opening the aac valve and raising the revs trying to compensate for air being lost somewhere but cant get enough so it stalls.

When its jerking is there alot of black smoke coming out of the exhaust?

the engine manual says idle should be set at 650rpm, but mines at around 800-900rpm.

apart from using more petrol at idle i dont see there being any problem with that

Edited by r32woohoo
1 - it seems that most 32's have the same cold start issue. mine included, you learn to live with it after a while. cleaning the aac valve and iac valve helps

2 - like others have said it's probably the afm dying. if you have an atmo bov that could be causing the problem too. get a std bov and see if that fixes it

3 - could be your afm again, could be your coilpacks. is it misfiring (exhaust making popcorn noises)? whats your spark plug gap? it could be an air leak. Check your intercooler and turbo piping for any leaks, make sure the hose clamps are tight and the pipes/hoses firmly seated.

My car used to jerk + misfire etc on boost but drove around fine off boost, turned out to be the tiniest air leak from a slightly loose hose clamp that grew on boost but sealed off boost.

the revving over 1000rpm then stalling could be because the motor is opening the aac valve and raising the revs trying to compensate for air being lost somewhere but cant get enough so it stalls.

When its jerking is there alot of black smoke coming out of the exhaust?

the engine manual says idle should be set at 650rpm, but mines at around 800-900rpm.

apart from using more petrol at idle i dont see there being any problem with that

Yeah I think the jerking is some sort of boost issue. What boost is running? Also it could be a leak of one of the hoses etc as R32woohoo said or it could be a blocked wastegate etc.

Bottom line: that jerk indicates that the ECU is cutting boost in what it believes to be an emergency situation where the boost is climbing too rapidly for what the stock ECU thinks is installed in the car and is likely to blow a head gasket if it continues.

And if you're not overboosting then I think the ECU thinks you are/there is a flow problem that could be potentially major if it wasn;t cut off. Don't drive around with it continuing to do that, cutting off boost so immediately that the entire vehicle jerks violently CANNOT be good for your cars internals (just better than the alternative to the ECU).

Theres no such thing as boost cut. the ecu has no control over boost whatsoever.

If its an air leak it jerks because the air that was supposed to go into the cylinder for combustion has leaked out and the fuel cant ignite.

ie: the injectors are squirting but theres no air to burn it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...