Jump to content
SAU Community

Recommended Posts

Whats the performance like on these $100~ chinese oil coolers compaired to Jap/Aus spec coolers?

Currently run an averaged size PWR oil cooler on my GTR but im not happy with the temps it gets up to on the track so wouldnt mind adding another if its only going to cost me $200~ all up its a good investment.

Link to comment
https://www.sau.com.au/forums/topic/169705-oil-cooler-qualityprice/
Share on other sites

Whats the performance like on these $100~ chinese oil coolers compaired to Jap/Aus spec coolers?

Currently run an averaged size PWR oil cooler on my GTR but im not happy with the temps it gets up to on the track so wouldnt mind adding another if its only going to cost me $200~ all up its a good investment.

How big is the PWR cooler?

20cm x 20cm by not very thick >_< , i havent seen any other coolers up close but the fins seem really close together compared to the cheapies?

I also need to make some ducting for it but i doubt that will decrease temps dramatically.

Where do you find these 100 dollar coolers, I have a HKS cooler (radiator only) and need the rest of the deal to get ot going.

If it comes with the sandwich plate and the filter relocator it would serve me perfectly.

Im talking about oil cooler only, they can be had new for 50-150+ new depending on size from ebay, JustJap etc. I was just going to purchase lines seperatly, allready have thermostat etc & it looks to have room to hook another cooler in no probs.

Sell me your HKS cooler & buy a kit >_<

Im talking about oil cooler only, they can be had new for 50-150+ new depending on size from ebay, JustJap etc. I was just going to purchase lines seperatly, allready have thermostat etc & it looks to have room to hook another cooler in no probs.

Sell me your HKS cooler & buy a kit >_<

UMMMMM.....no :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...