What Garret Turbo Will Make Me 280 To 300rwkw?

[Nic19]

well guys after having cheap chinese stuff i wanna get something decent and i can get good price oin garret stuff so just wondering what most others have been using.is going on an r33 gtst with all the supporting mods.

Cheers

Edited May 28, 2007 by Nic19

[DRD-00F]

???

lol, i dunno

[R31Nismoid]

There is a whole thread

RB25 Dyno results.

There are also 3 or 4 300rwkw threads about now.

I would suggest searching around first and then you'll see soon enough what you need.

[STATUS]

why limit yourself to GARRETT?

[BOOSTD]

GT3071R, GT3076R

[spirosky33]

garrett gt3076r or hks 3037

should do the job no probs

[Nic19]

is it possible to mount the GT3076r or HKS3037 in the original position?

[scarface]

to4e on 18psi , cheap and fits on the stock manifold

[tridentt150v]

is it possible to mount the GT3076r or HKS3037 in the original position?

Yes, could need a spacer plate as well is all. This is to space the turbo housing out 6-10mm off the manifold, some people get away without one, others need the spacer.

If you buy a HKS cast low mount you don't need the spacer, but you will need a heap of other stuff [dump, intake, wastegate etc] and you'll have to cut the engine mount away a bit as well. But it is a low mount and bloody hard for anyone to see what you are running with. The turbo tucks in underneath.

Generally speaking, the stainless steel units are high mount, the std manifold is a side mount, the hks unit is a low mount.