Jump to content
SAU Community

Recommended Posts

howdie all,

just wondering weather or not stretching 235mm tyres onto a 255mm rim is safe and easy?

have spoken to a few places and they seem to think thats the way to go. Also, whats a fairly decent tyre i should look for, any particular brands and types?

any help would be much appreciated!!!

cheers.

Link to comment
https://www.sau.com.au/forums/topic/170927-stretching-tyres/
Share on other sites

If by 255mm rim you mean there there is a 255 tyre on there now and it sits flush, then 235 will fit on there pretty easily (assuming 17s or 18s, the larger sizes might start struggling a little with the smaller sidewalls)

As for brands, look here.

http://www.skylinesaustralia.com/forums/in...showtopic=72923

reduced safety is the main difference between stretching a sidewall and doing it properly.

What size is the rim you want to fit it on? there are industry standards about widths and tyre manufacturers also publish recommended rim sizes

There is a heap of info in the "what tyres have you used" thread in this section - I guess it depends on your needs and price range.

reduced safety is the main difference between stretching a sidewall and doing it properly.

[/qoute]

In many cases stretching is doing it properly, and 99% never has any effect on safety. Maybe the safety of your rim against gutters.. haha

In many cases stretching is doing it properly, and 99% never has any effect on safety. Maybe the safety of your rim against gutters.. haha

not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

it looks HEKTIK ULEH.........but kinda retarded at the same time.

i wouldnt do it to my tyres.

on the flip side, how about slighty oversized tyres on smaller rims.

ive got 265's on the rear. they fit nice. i was thinking maybe going with 285's next.

whats the effect on sidewalls etc ?

Edited by Munkyb0y
not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

I base it purely on my experience (in real life) where I have never had a single problem with tyres magically exploding or debeading running 215/45 on 9J. I can pretty safely say that I have gone through more tyres in the last two years than most people on here.

I have even broken a wheel running a 215/40 on a 9J and the tyre did not deflate. I smashed a 215/45 on a 9J into a gutter destroying the wheel and again the tyre did not deflate or debead. The only time I have had a problem with leaking was when I pinched the bead because I suck at fitting tyres. Actually now that I think about it, the rear wheel/tyre setup on the picture in my avatar is 215/45 on 9.5J, again, no problems.

One thing that I do understand people getting upset about, is beading the tyre.

Often people will exceed the recommended beading pressure either using an chemical explosion or a very high pressure air tank.

If you use a bicycle tube while beading the tyre it is possible to bead the tyre using around 50psi if the stretch is not too crazy.

One other way if you are going for crazy stretch is to stretch the tyre on a less-wide wheel to pre-stretch it so you can put it on your really wide wheel later.

Also the wheels you are using make a huge difference. The best wheels I have seen for stretching tyres are Work VS-KF, they bead so easily.

So basically, I have nothing more to go on than the evidence of what I have seen and experienced in real life. Which I realise can be confusing for many people on internet.

edit: I do of course realise that as someone who has been known to partake of the occasional drift, my credibility is through the floor as far as SAU goes :domokun:

Edited by Laurence
Massive stretch is retarded, it doesn't even look good. I fail to see the purpose of it, you want some sidewall flex otherwise its just too unpredictable. Unless you drift non stop then the correct tyre size is going to perform better.

I 100% agree that massive stretch is retarded as i even posted i did it (245" on 12 or 13" rims )for autosalon 5 years back for shits and giggles.

not picking a fight, but where is your evidence?

admittedly you could say the same for the recommended fitting tyres to rim widths (in terms of evidence) but I'm much more willing to believe a tyre manufacturer as a guide to rim fitments, against a fully sick drifter dude...

We work very closely with TOYO and tyre size guidelines are to stop mororns from fitting tyres up wrong and claiming damages and are for common applications.... as with anything there is always improvements to be made above and beyond the posted guidelines. It is much like wheel alignments, manufactures have guidlines but after that every thing is subsective.

In my post post i should have put also that if it is done properly has ZERO effect on safety instead of saying that in 99% of cases (1% retarded) but yeah read it as you wish.

In our application the steering feedback from stretched 235 R888's on a 9.5" rim is far better than the 9" rim limit that most tyre shops will fit it up too....

Edited by URAS

why not hey :P

stretching tyres makes them MORE predictable, not less, then having wider tyres on there, simply because there is next to no sidewall flex. Fitting wide was tyres or narrow rims gives you the V8 bogan look of Bags on the rears... not too bad for drags but horrible for corners and sliding.

why....

So you can have wheel fitment like this...

Urashood008.jpg

Spending thousands of dollars on making a pure performance machine that wins $5 trophies that nobody cares about is equally stupid, but just depends what floats your boat.

Edited by Laurence

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...