Jump to content
SAU Community

Recommended Posts

who in perth does it ? is it worth me getting it done atm when i plan on getting SAFC NEO and a EBC soon (soon means a few months :rolleyes:)

current mods r

stainless 3"intake pipe with pod

3" turbo back

FMIC

thats bout all that would effect engine i think :S

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/
Share on other sites

no point tuning your car 2x times.

i know for tuning safc its like $150-$250, i would guess retuning stock ecu would be more like tuning something like a pfc so you will be looking at $400-$450 (just a guess)

And if you retune your stock ecu then there is no point in getting an safc.

safc is a band-aid , quick fix, retuning stock ecu is just as good as getting a full ecu

Cheers michael

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3170989
Share on other sites

no point tuning your car 2x times.

i know for tuning safc its like $150-$250, i would guess retuning stock ecu would be more like tuning something like a pfc so you will be looking at $400-$450 (just a guess)

And if you retune your stock ecu then there is no point in getting an safc.

safc is a band-aid , quick fix, retuning stock ecu is just as good as getting a full ecu

Cheers michael

ooh ok i didnt realise that, might not bother with SAFC then ?

hmmm or i might, if its cheaper to tune it might be better :rolleyes: seeing as i plan on getting injectors and fuel pump and then cams and cam gears

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3171020
Share on other sites

ooh ok i didnt realise that, might not bother with SAFC then ?

hmmm or i might, if its cheaper to tune it might be better :rolleyes: seeing as i plan on getting injectors and fuel pump and then cams and cam gears

if you plan on getting injectors, depends how large you go, the safc may not be the best opinion, as i know you can run larger injectors but the larger you go the harder it becomes to get it to work right. Also safc does not do timing which if you plan on going further with your mods you want to be able to adjust the timing through the revs etc

Althou if you buy the safc and get it tune with what you have now (so safc cost $200 + $150 tune), and changed ur mind later on you should be able to sell the safc for $200 and you just lose out on the cost of your tuning which isn't too much.

Cheers Michael

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3171047
Share on other sites

if you plan on getting injectors, depends how large you go, the safc may not be the best opinion, as i know you can run larger injectors but the larger you go the harder it becomes to get it to work right. Also safc does not do timing which if you plan on going further with your mods you want to be able to adjust the timing through the revs etc

Althou if you buy the safc and get it tune with what you have now (so safc cost $200 + $150 tune), and changed ur mind later on you should be able to sell the safc for $200 and you just lose out on the cost of your tuning which isn't too much.

Cheers Michael

thanks heaps for the input mate, will keep that all in mind :rolleyes:

i dont plan on going too crazy though, only 550cc probably bosch 040 (or 044) watever the intank one is, cams and a highflowed RB25 turbo

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3171065
Share on other sites

thanks heaps for the input mate, will keep that all in mind :rolleyes:

i dont plan on going too crazy though, only 550cc probably bosch 040 (or 044) watever the intank one is, cams and a highflowed RB25 turbo

safc should be ok to do that but you won't get the best out of your setup :thumbsup: as its only a quick fix...

unfortunately powerfc for r32 are hard to come by (need to get the AP type) so there is no real cheap full after market ecu for r32 :cheers: so maybe a retune of the stock ecu might be your best shot! Their is alot of heavy mod. cars going around with just a retune stock ecu (for example there is a 9sec gtr in japan running stock retune ecu)

Cheers Michael

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3171073
Share on other sites

safc should be ok to do that but you won't get the best out of your setup :thumbsup: as its only a quick fix...

unfortunately powerfc for r32 are hard to come by (need to get the AP type) so there is no real cheap full after market ecu for r32 :cheers: so maybe a retune of the stock ecu might be your best shot! Their is alot of heavy mod. cars going around with just a retune stock ecu (for example there is a 9sec gtr in japan running stock retune ecu)

Cheers Michael

yeh i noticed the 32 PFCs are hard to come by and expensive, that sounds nuts about that GTR haha, well sweet, sounds like u made up my mind for me :rolleyes: cheers ! guess ill just get the HKS EVC V and no fuel piggy back, thanks a lot :mellow:

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3171095
Share on other sites

according to this lumpy is no longer tuning outside of autronic and special stuff

http://www.westdrift.com/forum/viewtopic.php?t=1176

"Yes, it is true than i am not tuning for the general public anymore.

The only work I do in this area is with regards to support/supply/install/tuning of Autronic products, for which I am the dealer in WA, and I am also getting heavily into the data acquisition side of things.

The push towards a greater profile in professional motorsport occupies me these days, with 50% of my time spent interstate and some overseas stuff not too far away, with the management and ongoing development of the Slide-FX Pty Ltd drift racing team and it's in-house projects taking up what's left.

Thanks to all for the wishes and previous custom."

Link to comment
https://www.sau.com.au/forums/topic/172199-stock-ecu-remap/#findComment-3174963
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...