Jump to content
SAU Community

Recommended Posts

Here is my lil project, that unfortnately i cant complete cause i need cash...

Item located in melbourne, n looking for $3700 but open to resonable offers.

The engine is currently just dummy assembled as per pics.

Please pm me for more details or call me 0411512344

Its pretty much everything u need except a gasket kit, bearing kit, n 26/30 pistons, n maybe a clean n hone n the engine would be ready for final assenbly. All electronics are there for it to run.

=R32 gtr head.. complete with manifolds, cams, rocker cover etc

=VL rb30 series 2 block with oil feed & drain.... Tapped out to suit gtr head and timing belt idler puller relocated

=R32 gtr computer

=R32 gtr complete loom

=2 hks pod filter with adaptors to suit R32 gtr AFM

=2 R32 gtr AFM and all intake piping

=2 R32 gtr turbos (need rebuild) $150ono

=R32 gtr sump & front diff

=All sensors, injectors etc needed to run

=Turbo piping (twin turbo pipe), oil lines, waterlines

=Cast exhaust mainfolds and dump pipes

=Gtr Intercooler $400ono

=Flywheel $50ono

=Gtr oil and water pumps

=Gtr p/steer pump

=Gtr Harmonic Balancer $40ono

=Standard Rb30e pistons n rods $75ono

Thanks for looking

Ralph

post-38581-1183033307_thumb.jpg

post-38581-1183033345_thumb.jpg

post-38581-1183033862_thumb.jpg

post-38581-1183033970_thumb.jpg

post-38581-1183034174_thumb.jpg

post-38581-1183034256_thumb.jpg

post-38581-1183034355_thumb.jpg

post-38581-1183034400_thumb.jpg

post-38581-1183034435_thumb.jpg

post-38581-1183034486_thumb.jpg

Edited by sbmotorsport
Link to comment
https://www.sau.com.au/forums/topic/172838-rb-2630-project/
Share on other sites

Very keen to sell guys!!, asking AROUND $3700 so feel free to make offers... Remeber this is not just a long motor comes with loom, ecu, manifolds, sensors, intercooler, AFM etc etc... Also willing to build the short motor for FREE is the buyer provides the 26/30 pistons (i'll foot the bill for machining n bearings)!!

Edited by sbmotorsport
Link to comment
https://www.sau.com.au/forums/topic/172838-rb-2630-project/#findComment-3183420
Share on other sites

  • 2 weeks later...
did u want everthing except the bottom end... like u want the cooler, ecu, loom etc as well or did u want just the bare head?

I am after the head with plenum, injectors, cam and centre covers (dont need timing belt cover), coil packs, loom, ecu, turbo lines, CAS.

dont need exhaust side at all or fmic or any part of block.....

let me know though.

Edited by Young GT-R
Link to comment
https://www.sau.com.au/forums/topic/172838-rb-2630-project/#findComment-3203534
Share on other sites

Your little project now is it?

You said it was your mates project not 1 month ago

http://www.skylinesaustralia.com/forums/in...t&p=3122509

Yeah buddy, my mate moved overseas n i ended up buyin it off him cause he needed the cash for the move... but i just dun have the cash or room for it cause i'm moving so yeah it was my friends a month ago now mine.. i didnt realize u had to tell the engines life story..

N i'm not really keen to seperate. I just want all of it gone...

Edited by sbmotorsport
Link to comment
https://www.sau.com.au/forums/topic/172838-rb-2630-project/#findComment-3204878
Share on other sites

  • 3 weeks later...
Here is my lil project, that unfortnately i cant complete cause i need cash...

Item located in melbourne, n looking for $3700 but open to resonable offers.

The engine is currently just dummy assembled as per pics.

Please pm me for more details or call me 0411512344

Its pretty much everything u need except a gasket kit, bearing kit, n 26/30 pistons, n maybe a clean n hone n the engine would be ready for final assenbly. All electronics are there for it to run.

=R32 gtr head.. complete with manifolds, cams, rocker cover etc

=VL rb30 series 2 short motor with oil feed & drain.... Tapped out to suit gtr head and timing belt idler puller relocated

=R32 gtr computer

=R32 gtr complete loom

=2 hks pod filter with adaptors to suit R32 gtr AFM

=2 R32 gtr AFM and all intake piping

=2 R32 gtr turbos (need rebuild)

=R32 gtr sump & front diff

=All sensors, injectors etc needed to run

=Turbo piping (twin turbo pipe), oil lines, waterlines

=Cast exhaust mainfolds and dump pipes

=Gtr Intercooler

=Flywheel

=Gtr oil and water pumps

=Gtr p/steer pump

Thanks for looking

Ralph

hey mate i know this is a bit off topic but i am in the process of building the same motor and i was just wondering if you could tell me how many teeth the timing belt has, or could you give us the numbers off the belt, if you still have the motor thanks steve
Link to comment
https://www.sau.com.au/forums/topic/172838-rb-2630-project/#findComment-3234237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...