Jump to content
SAU Community

Recommended Posts

hey mate

Are R32 GTR and GTST speedo cables the same part numbeR? i have the part number for the gtst just wondering if it is the same as the GTR. If not

whats the part number for the r32 gtr speedo cable?

thaks

Josh :D

R32GTR speedo cable = 25050-05U00-

hey mate

Are R32 GTR and GTST speedo cables the same part numbeR? i have the part number for the gtst just wondering if it is the same as the GTR. If not

whats the part number for the r32 gtr speedo cable?

thaks

Josh :D

I can confirm that part number supplied above 25050-05U00-

So technically the part numbers are different from year to year, engine to engine.

good luck

Added

doing my 100km service soon and figured i'd do the other belts 'down there'

are these the same for an R33 GTST?:

- Belt Fan & Alternator AY140-40880-

- BeltCompressor AY140-40925-

- BeltPower Steering AY140-40950-

doing my 100km service soon and figured i'd do the other belts 'down there'

are these the same for an R33 GTST?:

- Belt Fan & Alternator AY140-40880-

- BeltCompressor AY140-40925-

- BeltPower Steering AY140-40950-

I dont think they are the same as RB26. Here is what I have for you,

RB25DET 93- 96

- Belt Fan & Alternator AY140-40850-

- Belt Compressor AY140-40910-

- Belt Power Steering and Oil Pump AY140-30845-

also

- Belt Timing 13028-20P25-

- Filter Oil AY100-NS007-

Good Luck,

Added

Oil pump R32GTR 15010-05U11-

If by computer you mean engine management, as in what you replace with Powerfc Motec etc, then you have lots of choices.

This is what i got.

08/89 to 11/90 = 23710-05U02-

11/90 to 08/91 = 23710-05U03-

08/91 to 04/92 = 23710-05U60-

04/92 to 02/93 = 23710-05U61-

02/93 onwards = 23710-05U62-

Oil pump R32GTR 15010-05U11-

If by computer you mean engine management, as in what you replace with Powerfc Motec etc, then you have lots of choices.

This is what i got.

08/89 to 11/90 = 23710-05U02-

11/90 to 08/91 = 23710-05U03-

08/91 to 04/92 = 23710-05U60-

04/92 to 02/93 = 23710-05U61-

02/93 onwards = 23710-05U62-

Mate you keep beating me to this page, love your work.

Thank you and added.

One note, the Oil pump has two Models and I have added it as well, it was for 93/11 Onwards.

Cheers,

Added

I dont think they are the same as RB26. Here is what I have for you,

RB25DET 93- 96

- Belt Fan & Alternator AY140-40850-

- Belt Compressor AY140-40910-

- Belt Power Steering and Oil Pump AY140-30845-

also

- Belt Timing 13028-20P25-

- Filter Oil AY100-NS007-

Good Luck,

Added

LEGEND!! thanks man!

passenger left hand side inerior dash airvent for a 1991 r32 gtst skykine??? :blink:

GRILLE FRONT DEFROSTER LEFT 68743-01U00-

and for those people that want the drivers side,

GRILLE FRONT DEFROSTER RIGHT 68742-01U00-

Decided i may as well add all of the air vents off the dash.

This suits all R32 models from GTS to GTR

Drivers side defroster grille (GRILLE-FRONT DEFROSTER, R) = 68742-01U00-

Passenger side defroster grille (GRILLE-FRONT DEFROSTER, L) = 68743-01U00-

Drivers side, side defroster grille (GRILLE-SIDE DEFROSTER, RH) = 68740-01U00-

Passenger side, side defroster grille (GRILLE-SIDE DEFROSTER, LH) = 68741-01U00-

Drivers side air vent (Round one) (VENTILATOR ASSY-SIDE) = 68760-01U00-

Passenger side air vent (VENTILATOR ASSY-SIDE) = 68761-01U00-

Centre double air vent (VENTILATOR ASSY-CENTER) = 68750-01U00-

Cheers, Ron

Sick and tired of the whistling wind around the doors? i am!

R32GTR

Upper hard plastic seals (on car body)

RETAINER-WEATHERSTRIP,RH = 76870-04U00-

RETAINER-WEATHERSTRIP,LH = 76871-04U00-

Upper soft rubber seals (on car body)

WEATHERSTRIP-BODY SIDE,R = 76860-04U00-

WEATHERSTRIP-BODY SIDE,L = 76861-04U00-

Lower seals (on doors)

WEATHERSTRIP-FRONT DOOR,R = 80830-04U00-

WEATHERSTRIP-FRONT DOOR,L = 80831004U00-

Cheers, Ron

  • 2 weeks later...
Anyone have the part numbers for the coolant lines under the manifold? BNR32

All the numbers would be good but mainly one on the right.

are you after the rubber hoses or the steel pipe thats bolted on?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...