Jump to content
SAU Community

Recommended Posts

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Sorry don't have car atm but you could use this r33 GTR one:

1996 R33 GTR - BCNR33-024671

Cheers,

Pen

Pen, I can look up the info you wanna check tonight when i get home from the city. as for your question about the Tomei head gasket, the best place to ask about that is in the forced induction forum. This is only for oem parts.

Cheers, Ron

Anyone no the part number for the coil pack wiring harness ?? I had a look but couldnt find a part for it in fast :D

Jus i'll have a look for this as well when i get home tonight. might be a tricky 1 to track down. Your car series 1 or 2? better yet, whats ur VIN? (500th post!)

Anyone no the part number for the coil pack wiring harness ?? I had a look but couldnt find a part for it in fast :)

Tricky 1 mate but i'm fairly certain that this is what your after.

93 to 95 mdl 24079-75T00- harness assy-egi sub

95 to 96 mdl 24079-84T00- harness assy-egi sub

Try 24079 as the part code and check the illustration

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Sorry don't have car atm but you could use this r33 GTR one:

1996 R33 GTR - BCNR33-024671

Cheers,

Pen

Mate i'm finally stumped. i searched for ages and couldnt find anymore info on the crank sensor then what you already have. Arbess may be able to do better then me as he is better at this program then myself.

as for the N1 oil pump, that was easy. 15010-24U00-

how the hell did you find that ??

i could see it in the pictures, but there was no code. *edit* ooo i was looking in the wrong section :)

thanks heaps :D

oh yeah one last thing, do you know if the prices vary much between nissan spare parts places ??

Tricky 1 mate but i'm fairly certain that this is what your after.

93 to 95 mdl 24079-75T00- harness assy-egi sub

95 to 96 mdl 24079-84T00- harness assy-egi sub

Try 24079 as the part code and check the illustration

after the part number for a series 2 front right fender/guard? would be great help

cheers

ive got a big list of part numbers for R33 front fenders. 2 of them for a 96 GTST. I don't know the difference as i can't read Japanese. Whats your VIN and ill get a perfect hit on what your after.

ive got a big list of part numbers for R33 front fenders. 2 of them for a 96 GTST. I don't know the difference as i can't read Japanese. Whats your VIN and ill get a perfect hit on what your after.

its a ECR33 feb 96. vin: 6T91MPTECT1ABH004

thanks heaps

it would be cool if someone swiped the pricelist for parts somehow :happy:

cough cough someone here must work for nissan cough cough

Pm me your part numbers and I can give and indication of price as each dealer is slightly different.

its a ECR33 feb 96. vin: 6T91MPTECT1ABH004

thanks heaps

that doesnt look like a VIN to me at all. Australian VIN's look like 6U9000 then for example an R32GTR "BNR32123456"

The 6U9000 is added to the front of every Japanese VIN to make it Australian.

For your car it would be like : 6U9000ECR33 1 2 3 4 5 6

that doesnt look like a VIN to me at all. Australian VIN's look like 6U9000 then for example an R32GTR "BNR32123456"

The 6U9000 is added to the front of every Japanese VIN to make it Australian.

For your car it would be like : 6U9000ECR33 1 2 3 4 5 6

yeh i didnt think it was. i got the paint shop to have a look for me so was a bit doubtful. will try and find out and let you know.

cheers for the help

Just asking if you guys would know if these are the right parts - someone with nissan fast setup maybe?

Anyway your feedback would be great.

Oh my car is R33 GTR 1995 model.

Nissan OEM BCNR33 GTR Crank Angle Sensor

"NISSAN SENSOR A-CRANK 23731-02U11" ?

Nissan OEM GTR N1 Oil Pump

"NISSAN ASSY OIL PUMP 15010-24U01" ?

Also one other question I was getting block bored & honed to 86.5mm and was wondering if Tomei RB26 Gasket Kit (1.2mm) (87mm) would suit. As far as I can tell tomei only make a 87mm and an 88mm gaskets.

Sorry don't have car atm but you could use this r33 GTR one:

1996 R33 GTR - BCNR33-024671

Cheers,

Pen

Pen

Just as i was reading Arep3 replies to your posts, i found these

Crank Angle sensor is named

CAMSHAFT POSITION SENSOR 23731-02U11 <----- This is the same as the number you supplied

Arep3 i think the name was throwing us off,

N1 Oil pump for RB26DETT.GTR/N1.MT.F5

PUMP ASSY-OIL 15010-24U00-

alternate number 15010-24U01-

Hope that helps

and this car is a 1995 January by what FAST says.

Arep3

sorry mate, just a quick tip if you dont already know,

when the number is given to you from someone and you dont know what section to look at, the first part of the number is the section to look in, ie. 15010-24U00- the 150 is the section.

saves a hell of a lot of time. =)

cheers all, back to tedious uni work,

Arbess

yeh i didnt think it was. i got the paint shop to have a look for me so was a bit doubtful. will try and find out and let you know.

cheers for the help

read the first few post of this Thread ie. Page 1, tells you cinfidently where to get your numbers =)

good luck mate.

Arep3

sorry mate, just a quick tip if you dont already know,

when the number is given to you from someone and you dont know what section to look at, the first part of the number is the section to look in, ie. 15010-24U00- the 150 is the section.

saves a hell of a lot of time. =)

cheers all, back to tedious uni work,

Arbess

you learn something new everyday! thats gonna make life a lot easier. Cheers mate

Not sure if this will tell me what I want to know, but I'm after part numbers for the following...

R33 GTST (95?)

Front Wheel Bearing

S13 SR20DET (1992)

Front Wheel Bearing

Thanks :(

Not sure if this will tell me what I want to know, but I'm after part numbers for the following...

R33 GTST (95?)40210-33P02-

Front Wheel Bearing

S13 SR20DET (1992)40210-71L00-

Front Wheel Bearing

Thanks :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...