Jump to content
SAU Community

Nissan Genuine Part Numbers


arbess

Recommended Posts

i am fairly sure you would already know this considering you are useing the nissan part finder system to get all of these numbers (figures that out be seeing the pic of the rear QTR glass window). but all of the numbers that start AY are pitwork part numbers. unless they know what they are doing some dealers can not use theat number in their system but if they know wat they are doing they can cross referance to a genuine nissan number.

Link to comment
Share on other sites

i should post a pic of my certificate saying im qualified in using nissans fast catelog :whoops:

never said you where not qualified at using the fast system. i am to. just saying that some dealers can not use the pitwork part number in their pricing system. just to make that clear

Link to comment
Share on other sites

Anyone got the part number(s) for the gasket/seals for the cam covers in an R33GTS-t? Want to paint my cam covers and while I'm at it I might as well replace the seals as there's a tiny leak

Link to comment
Share on other sites

Sorry guys, its been a long weekend. Crispyfries, mate if i were you i would call up Nissan and ask them if the bearings can be interchanged and which bearings are the cheapest.

Cheers Ron, I've actually got my hands on a set of R33 hubs now anyway, and what I had in mind is definitely not possible, even if it was the same bearings.

Link to comment
Share on other sites

Just a quick note to everyone, my Windows has died and i cant be stuffed tracking down a copy of windows and then reinstalling it. Linux is working just fine for me. The only thing is I havn't got Wine (Windows emulator) installed yet so i can't install FAST. Sorry guys. Although there is at least 2 people that read this thread that are certified in using FAST (Thats if I assume right) Maybe they could throw some numbers in for a while.

Cheers, Ron

Link to comment
Share on other sites

R32 GTST Manual Flywheel Bolts: 12315-04U00

R32 GTST Manual Bellhousing Bolts: 08071-0601A

R33 RB25DET Rocker Cover Gasket LH: 13270-58S01

R33 RB25DET Rocker Cover Gaskets RH: 13270-58S11

R33 RB25DET Cam Half Moon Seals x2: 11051-58S00

Link to comment
Share on other sites

IM searching for a set of Brake shims for GTR33 Brembo front calipers? they are also the same calipers as the R32 GTR Vspec brembos

first picture is of the brake system on R32 GT-R and the second is of a R33 GT-R only the R32 has shims. part NO. 41218 12U26

post-42804-1192008413_thumb.jpg

post-42804-1192008438_thumb.jpg

Edited by neofenrir34
Link to comment
Share on other sites

R32 GTST Manual Flywheel Bolts: 12315-04U00

R32 GTST Manual Bellhousing Bolts: 08071-0601A

R33 RB25DET Rocker Cover Gasket LH: 13270-58S01

R33 RB25DET Rocker Cover Gaskets RH: 13270-58S11

R33 RB25DET Cam Half Moon Seals x2: 11051-58S00

for the fly wheel bolts i also got Part No. 12315 80S00 if it fall's between 0589 to 0789 production date

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ye but that kinda proves GTSboy's point. What's 500 EUR at the end of the day? The END of the day being post install/setup/use. The Blackline could be great. BC Coilovers are pretty great too. "Cheap" alternatives can turn out to be well worth the money and be new bang for buck options. The DIY and cutting half shafts option though.... less so. I'm a big fan of buy once, cry once, which has resulted in me doing everything a large number of times anyway lol.
    • A big issue with these is, unlike the R200, diffs are super expensive. The Blacklines are about €800, Quaife is €1,300-1,500 and any clutch LSD is the best part of €2,000. Have a look on some of the BMW forums, the Blackline has really good reviews for track use - I’m sure not if you’re subjecting it to extreme high performance - but it’s enough for me to go for it. 
    • Hi mate! yeah as far as I can remember u need to rotate the motor in the correct position and then mount the arms (linkage). the motor always does the same movement.  u need to think yourself into and try it a couple times. i think my mounting position was was 90 degrees horizontally pointed to the right side if you are looking at it from the front of your car but not sure anymore   best way to double check it is do draw the motion on a sheet of paper and connect the motor to really see how it moves
    • Hi mate, did you work this out? I have the same issue with my 32!  Cheers
    • I currently have someone who is interested in buying the rear set, plus he has asked me to quote him on an equivalent front set, new of course.   I'll post up what a new set would cost and you can make a decision then. I noted a bit of discussion on spring rates versus swaybar rates, Duncan has explained my approach very well.  What I would add is that if you have high spring rates then it is a PIA to change them if you want to, say, do a track day.  Whereas with adj swaybars it's a much easier task. Plus if you find that there is an imbalance in the handling (oversteer vs understeer preference for you) it is relatively easy to change the balance with adj of the swaybars, again much more difficult with springs.  On the race cars we don't change spring rates all that often, we do however change damper rates frequently, high speed vs low speed bump and rebound independently.  A tuning task not for the inexperienced, driver or engineer.  Driver adj swaybars are adj frequently, several times in 20 minute race is not unusual.   Cheers Gary
×
×
  • Create New...