Jump to content
SAU Community

Recommended Posts

Looking for some trim parts for my S15. Looking for the outer door trim that sits on the top of the metal door and has the end that has a bracket that is screwed to the door itself. I need both Left anf Right.

Next is the metal track that runs perpendicular and sits in front of the quarter glasses and is the housing for the rubber seals. I need both sides in those as well.

Lastly, I need all the rubber sealing that fits around the door on the body of the car, not the door, that seals the door to the body of the car. I already have the door rubbers that attach to the door but not the one that attaches to the body. Can anyone help me please as I need these urgently.

If I can get pictures I can confirm. I also need these small items shipped to me in Trinidad in the Caribbean, postal code is TT. If they can be had used as well I am interested as I need them urgently please.

Jason.

Looking for some trim parts for my S15. Looking for the outer door trim that sits on the top of the metal door and has the end that has a bracket that is screwed to the door itself. I need both Left anf Right.

Next is the metal track that runs perpendicular and sits in front of the quarter glasses and is the housing for the rubber seals. I need both sides in those as well.

Lastly, I need all the rubber sealing that fits around the door on the body of the car, not the door, that seals the door to the body of the car. I already have the door rubbers that attach to the door but not the one that attaches to the body. Can anyone help me please as I need these urgently.

If I can get pictures I can confirm. I also need these small items shipped to me in Trinidad in the Caribbean, postal code is TT. If they can be had used as well I am interested as I need them urgently please.

Jason.

for the first ones ( door belt moulds ) part No.

80820-85F10 RH

80821-85F10 LH

for the second request i am not to sure the first to No. are retainers that look to hold the top door weather strip. and the seconed No. look to hold the QTR glass it's self

76872-85F00 RH

76873-85F00 LH

82328-92F00 RH

82329-92F00 LH

and for your final request i would need to know more info on your car. I can't help u with shipping or prices, sorry

for the first ones ( door belt moulds ) part No.

80820-85F10 RH

80821-85F10 LH

for the second request i am not to sure the first to No. are retainers that look to hold the top door weather strip. and the seconed No. look to hold the QTR glass it's self

76872-85F00 RH

76873-85F00 LH

82328-92F00 RH

82329-92F00 LH

and for your final request i would need to know more info on your car. I can't help u with shipping or prices, sorry

Thanks again.

Hi Guys

Forgive the idiotic nubi question, but I'm looking for the part number for a '00 R34 GTT (RB25DET Neo) Engine Loom..

If there are multiple part numbers is it possible to get a listing?

Thanks..

Hi Guys

Forgive the idiotic nubi question, but I'm looking for the part number for a '00 R34 GTT (RB25DET Neo) Engine Loom..

If there are multiple part numbers is it possible to get a listing?

Thanks..

what parts do u need for tis engine wiring loom because there are about 3 looms that do all of the engine bay. and more info would help like a vin number

hey,

do you guys have the part number for the studs and nuts

R32GTR

1. Turbo to dump pipe

2. Turbo to exhaust manifold

is there a part number for a turbo gasket kit

there is a gasket kit Part No. 14401-05U25

what parts do u need for tis engine wiring loom because there are about 3 looms that do all of the engine bay. and more info would help like a vin number

If it helps, from what I have been told I need them all, as the car is a NA+T transplant. VIN number won;t be much use as the car is originally a NA and this is to a stock Turbo ECU that is being attempted to get working right :down:

Hence would need part numbers for the stock turbo gear from any 34 GTT, the more the merrier.

  • 4 weeks later...

Hi there,

Can someone help me out with part numbers for:

R33 GTR bonnet hinges; left and right.

R33 GTR bonnet catch/upright.

R33 GTR guard raiser brackets; left and right.

Having a bit of trouble finding these locally so am looking at sourcing them from Japan.

Thanks,

Rob.

  • 2 weeks later...

Hi can i get the part numbers for:

r34 xenon drivers side headlight

r34 gtr bonnet, fenders left hand and right handside,

thanks.

does anyone know where i can get these parts other than nissan genuine, they keep bothering me about these part/model numbers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...