Jump to content
SAU Community

Recommended Posts

^^^ ok confirmation that's the correct part number ^^^

however the switch from nissan is $345... lol

Part No.s 25160-01U02 and 25160-01U03 come up on my system but they may by old numbers by now, looks like it could just have superseded

Hey mate. Was just wondering if you could find the part numbers for the both front door rubbers and rear tail light assy, on a 1993 R32 4 door at all????

V.I.N HCR32297424

MODEL RCR32GFSLAA

Cheers.

80830-01U10 weatherstrip FRT DR RH

80831-01u10 weatherstrip FRT DR LH

are the weatherstrips that fit to the lower sections of the doors

76860-01U11 weather strip body side RH FRT

76861-01U11 weather strip body side LH FRT

are the weatherstrips that fit to the body and seal the glass to the body

B6550-01U60 RH rear taillight

B6555-01U60 LH rear taillight

80830-01U10 weatherstrip FRT DR RH

80831-01u10 weatherstrip FRT DR LH

are the weatherstrips that fit to the lower sections of the doors

76860-01U11 weather strip body side RH FRT

76861-01U11 weather strip body side LH FRT

are the weatherstrips that fit to the body and seal the glass to the body

B6550-01U60 RH rear taillight

B6555-01U60 LH rear taillight

Thanks. Much appreciated. :D

yes still in use, appears i am the only one responding.

Thanks for helping us out bud

28174-5P600 RH

28175-5p600 LH

those should be close, however being a trim part i would prefer to have a vin number

My vin number is ER34202802 can you confirm the part numbers?

Thanks heaps

  • 1 month later...
Thanks for helping us out bud

28174-5P600 RH

28175-5p600 LH

those should be close, however being a trim part i would prefer to have a vin number

My vin number is ER34202802 can you confirm the part numbers?

Thanks heaps

Sorry for late reply. Yes those numbers are the one the vin selects

Hey all,

I am chasing a part number for a passenger side rear Wheel bearing to suit R34 25gt

My Vin is ER34005218

Cheers

Shane

Part No. 43210-AA100/43210-AA000. part has superseded, it will be one of then number. (which ever one works)

  • 3 weeks later...
  • 4 weeks later...

I need a part number for an R32 Spec RB25DE. Is it 21200-42L06 ? As this seems to be the R33 number.

The engine is not the original one for the car, so not much point giving people the vin number. Any help would be appreciated.

I'm looking for the bushing for the link and arm or whatsoever it is call.

Nissan R33 GTS25T S2.

4740942763_e87cf63f29_b.jpg

if someone has the page of it in their service manual, it will help me a lot since nissan dealer told me it was to old...

you can send it to [email protected]

Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...