Jump to content
SAU Community

Recommended Posts

I took my R34 to Top Racing about a week and a bit ago.

Paid them to install an Avcr and SAFC.. I had already done all the wiring for both, but paid for the loom etc to be put through to the engine bay and the solenoid and pressure sensor installed. AND THEN A TUNE

I figured paying for it meant less effort for me.. too lazy :thumbsup:

anyways..

they said the solenoid on the avcr is busted. and they could only tune the safcII on 6psi factory boost.

Told me to get another solenoid and then they can retune it

Anyways a week and a bit later i went through the whole install myself. shortened the run of vacuum hose and relocated the pressure sensor to a different location as the book said keep the hose as short as possible. I also ran 12v over the solenoid... it make clicking noises... AKA...it was WORKING

thats all i changed.

then i went through the avcr itself. vehicle settings were correct.

but the main thing... THE SENSOR SETTING was wrong.

once i set that.. the solenoid was ticking away happily and the boost reading was coming up nicely on the display etc.

perfect..

So my question is..

Do i take the car back there and ask for a retune on higher boost FOR FREE as they did not install the unit properly.

I feel like this is the right thing for me to do. I paid for 3 hours worth of labour and then an hour of tuning.

for an install that wasnt done properly in the first place..

any advice.

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/
Share on other sites

I would think, that if you pay for the job you are entitled too ask them to tune the ebc for free, as they were incorrect not you. And im guessing they would have tune the ebc at the same time they tune the safc so the cost of tuning wouldn't have increased.

I would say your best bet is to go down and talk to them in person and see if they are willing to fix the problem

Cheers Michael

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3183762
Share on other sites

aaah good.

this is my intention

I really wanted to check if it sounded unreasonable.

I went there because of all the positive feedback so i hope they will come to the party.

anyways in the meantime i fried the headunit of the avcr.. plugged it into the safc plug.. complete noob thing to do.

sooooo.. anyone not using the headunit for a day i would like to rent one for the tuning...

I am happy to pay someone to use it for the day

so if anyone is a weekend warrior and not using their line for a day or 2.. drop me a PM.

1 more thing... Who actually does the tuning at Top Racing.

oh and HIPSI....crossed my mind SO SO SO many times.. but seriously.. these guys get a great rap on this forum.. and this is why i went in the first place. My requirements are simple compared to the types of machines people need tuned. I reckon they will come good

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3184136
Share on other sites

no point using someone else's AVCR to tune it, as when you unplug it, it wont be controlling the boost, and doesnt the control unit store the settings anyway? thus erasing the owners settings, and you will need to get it re-done when you get yours fixed/replaced.

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3184182
Share on other sites

no point using someone else's AVCR to tune it, as when you unplug it, it wont be controlling the boost, and doesnt the control unit store the settings anyway? thus erasing the owners settings, and you will need to get it re-done when you get yours fixed/replaced.

if the AVCR, is like any other ebc, there will be only a few settings (4 if i remember correctly) gain etc etc...

You can just write down those values, get his car tune for the higher boost (copy down the values for his boost setting) then just give it back and put the old settings in

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3184201
Share on other sites

If you have blownen up one head unit, that does not give anyone good confidence to lend you theres!

There is only a few main settings on the AVCR, but the self learn mod sets about 10 points per boost setting and people will use at least two boost settings, so it not realy a simple fix.

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3184456
Share on other sites

yeah i know... the confidence..

if its a plus.. the safcII is plugged in safely.

leaving only 1 spot free for the avcr... *CHEEZY GRIN*

hahahaha

Michael is on the case so I will retract the request for borrowing.

I will have a replacement head unit shortlyish

then its off to top racing for a negotiation

anyways on a brighter note... when the avcr did work before i decided to relocate it... car was super happy.. i completely forgot the rush of boost from my old series II

the 34 tiptronic is so smooth and linear that i forgot what i was missing..

higher boost is the new black right now

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3185051
Share on other sites

no point using someone else's AVCR to tune it, as when you unplug it, it wont be controlling the boost, and doesnt the control unit store the settings anyway? thus erasing the owners settings, and you will need to get it re-done when you get yours fixed/replaced.

for the record, that was mitch that posted under my name.. I have no idea what an AVCR is :worship:

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3188329
Share on other sites

id like to say good on you, because you came on here and was open minded and aked and question instead of one silly little thing going wrong and you tarnishing there name and with that attitude (as steve has shown) they are more than happy to help you out!

Link to comment
https://www.sau.com.au/forums/topic/173154-top-racing/#findComment-3193118
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...