Jump to content
SAU Community

I Killed My Rb25... Again:(


NickR33
 Share

Recommended Posts

i know ppl with gtst that have nearly 300rwkw and still have standard bearings.. they are not really needed but u might as well do them while everything is out...

Link to comment
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi Nick, As per everyone else I was sorry to hear and hope she goes back together with no dramas...and hey she'll come back stronger than ever ;)

I recommend going something like an N1 oil pump (I also believe the Jun oil pump is a top item but $$) and the rest of the mods you suggested from the SK thread. I too would baffle the sump at the very least.....items that fit to your existing sump without mods are fairly cheap and is good insurance. Definitely loose the Penrite IMO...I have not heard good things about it during my time on SAU....benno uses and recommends Castrol Edge 10W60 and this oil has been good enough for me over the past 3/4 years. Overfilling the oil is a must do although the extra capacity of the cooler will help.

Link to comment
Share on other sites

You "freely say" alot of things Ash; many of which alot of people disagree with :nyaanyaa:

Yep, and true to my word i run the setups based on that, and they are all fine.

Everyone said i wouldnt make anywhere near what i did on stock cams.

I did that easy enough.

And i'll also run a 300+rwkw circuit car with a stock sump/cams ;)

People tend to disagree because they blindly accept what they are told by mechanics without actually looking into things

Link to comment
Share on other sites

Chris ran 1.21's around sandown with RE55's on a stock RB26 engine/sump.... 250rwkw.... no issues with spun bearings, so there was no Benno Trickery there.

I've run 1.22's around sandown with RE55's and a stock sump (as far as i know anyway) But there is other Racepace trickery with the oil in my engine, but i think the sump is still stock. I don't think the sump is the issue, but gtst could be different to GTR... It wouldn't hurt to put a baffled sump in, but don't assume its needed....

I'm with Troy... Penrite 15w? I don't know if it was the oil, but i defiantly recommend the Castrol Edge Formula R 10w-60 stuff... that's what most of us run....

Link to comment
Share on other sites

yeah the Penrite isn't my choice but I get the servicing for free so wasn't arguing... I really didn't think I would have this problem so I must admit I was a bit slack... just have to do things the right way, a little bit of work on the motor to control the oil better, using more oil and better oil I reckon I should be right... if I do everything else I don't think the sump is needed... I'm going to get a couple more quotes though, it will be going to a specialist workshop this time

Link to comment
Share on other sites

interesting email I just received from Hi Octane when I inquired about oil restrictors for the RB25

"Under no circumstances should you restrict oil to the RB25 head. The RB25 runs hydraulic lifters and needs a lot more oil supply or will result in failure."

Link to comment
Share on other sites

I've run 1.22's around sandown with RE55's and a stock sump (as far as i know anyway) But there is other Racepace trickery with the oil in my engine, but i think the sump is still stock. I don't think the sump is the issue, but gtst could be different to GTR... It wouldn't hurt to put a baffled sump in, but don't assume its needed....

Reading what Nick has said I don't think the lack of baffled sump is to blame.....however not over filling the car + the fact it doesn't have a baffled sump cannot be good. First and foremost Benno recommends that you over fill the car with oil...once thats taken care of any other mod like the baffles etc etc is extra insurance.

Link to comment
Share on other sites

Using your standard Penrite HPR stuff, 15W I think...
15W what? IIRC, Penrite is 15W40, maybe. 15W60 (and the '60' is the critical number) seems to be what is required if you are intent on caning the engine.
Link to comment
Share on other sites

Using your standard Penrite HPR stuff, 15W I think... oil was 4,000km old and really should have been changed (had done a DECA on that oil)... oil temp was okay, in the high 80's low 90's at the time... no misses car was running great, I was coming out of the 3rd last corner, going under the bridge, high rpms in 3rd gear and it just let go

yep Ash seriously considering that option... I really don't want to have to take it out again

Really bad news... sorry to hear.

eeek penrite... cricuit sprints is harsh on oil and drifting is even harsher... both penrite and Castrol both breakdown way to quickly in harsh conditions.. we spent a lot of time testing differrent oils last and early this year and group V's are really the only way to go. You should see castrol edge after one drift day.... it comes out like thin as like metho or water and it noticeably traumatised :D... drop out 300v or redline 10w-40 and it is like new after 3 events even mobil 1 seemed to fair way better :D redline actually told us to run the same sump all year but im old school and that scares me, we now change it every 2nd event to be sure.

i look at oil as insurance, pretty cheap insurance.

Link to comment
Share on other sites

But are we sure that the rebuilt GTRs in Vic are usign completely std sumps?

I know a few of us no longer have standard sumps. The engine was out so may as well play it safe. It's a Benno built 8L. I'm pretty sure the same one is on Scotsmans, Jacks and Aarons.

Link to comment
Share on other sites

imo a litre over full is way too much.keep in mind that to much oil and you can start to blow seals.

when i am changing the oil i allways empty whats left in the oil cooler out and refill the engine with 5L of oil then all it takes is another 100-200ml extra oil to fill up the oil cooler.all up,it fills everything and some. my 19row oil cooler in reality only holds a 100-200ml at a guess,if that.

because my car is pretty much exactly the same as yours is bar the azenis and i run 13psi all day every day.for ages and ages it has been this way..and see's pretty much the same sort of track abuse throughout the year id say that you should go the oil cooler route.

Castrol Edge sport 10w-60 is gold i use it every time.

Link to comment
Share on other sites

I know a few of us no longer have standard sumps. The engine was out so may as well play it safe. It's a Benno built 8L. I'm pretty sure the same one is on Scotsmans, Jacks and Aarons.

ah yeah ive seen these killer 8l sumps down at access performance in vermont... killer items.

Link to comment
Share on other sites

i know ppl with gtst that have nearly 300rwkw and still have standard bearings.. they are not really needed but u might as well do them while everything is out...

Read what i am typing buddy.............

It's NOT about the power, it's got to do with my applications and high reving.

Link to comment
Share on other sites

People tend to disagree because they blindly accept what they are told by mechanics without actually looking into things
Not hear buddy :)

I have also done my research and act on various advise from various people, including those for interstate. If i just listened to my mechanic i would have never fitted the r34 hi-hlow, which was a great item and my current build would have a 800hp turbo running NOS :(

Yes one can make the power on a standard engine, using a bigger turbo or running more boost, etc. Cams have been a well proven benifit, and even Ben wouldn't disagree.

Link to comment
Share on other sites

I know a few of us no longer have standard sumps. The engine was out so may as well play it safe. It's a Benno built 8L. I'm pretty sure the same one is on Scotsmans, Jacks and Aarons.
Thanks Snowy.

I never said a sump is a must, just stated that it is good insurance. I always side on the side of caution, so if some consider my enhancements as overkill, well so be it :( .

Link to comment
Share on other sites

Really bad news... sorry to hear.

eeek penrite... cricuit sprints is harsh on oil and drifting is even harsher... both penrite and Castrol both breakdown way to quickly in harsh conditions.. we spent a lot of time testing differrent oils last and early this year and group V's are really the only way to go. You should see castrol edge after one drift day.... it comes out like thin as like metho or water and it noticeably traumatised :(... drop out 300v or redline 10w-40 and it is like new after 3 events even mobil 1 seemed to fair way better :) redline actually told us to run the same sump all year but im old school and that scares me, we now change it every 2nd event to be sure.

i look at oil as insurance, pretty cheap insurance.

What brand of oil are Group V's or 300V?

Have you tested Fuchs GTO? (not sure if i spelt it correctly)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...