Jump to content
SAU Community

Recommended Posts

YOU GUYS WON' BELIEVE IT

an old lagi crashed my rolling door push my car inside and my R34 hit the wall shittttttttttttttt

bumper, boot, left light all badly damage, the left party badly damage, my left head light crash into wall (just imagine) it, windows scratched, I don't know what to say it just crazy need to be repaired arghhhhhhhh lucky insurance and the lady will pay for it

Pics later post

Link to comment
https://www.sau.com.au/forums/topic/17386-my-car-wreckedddddddddd/
Share on other sites

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Ooh, i can translate this.

Background: Erik's driveway begins at a roundabout intersection.

Translation:

an old lady crashed into my roller door, pushing my R34 inside and hitting the wall. shittttttttttttttt

bumper, boot, left light all badly damage, the left part badly damage, my left head light smashed into the wall (just imagine) it, windows scratched.

--

Shit, sounds like the RAC advert. Hope it works out ok.

Man, You should pass my house now, the builder remove my rolling door and it's all open for thiefs to come in f**k.

My carrrrrrrrr nooooooo, melville motors will do the repair I think, I'll fill claim report now sigh.

But on the other side, pretty lucky, I got new front and rear bumper as well as new windows, head lights and stuff, the front bumper was damage since I bought it.

But still I won't have car until 2 or 3 weeks man, exam soon I think I should change my car from R34 to Transpert ^^

erik - pity the old lady? maybe so but insurance does cover so she will be paying excess only rite? as long you're not out of pocket because of other ppls mistakes then ure OK

the hassle of it all is not having your car..

are u sure 3-4 weeks? doesnt sound like a long time...will prolly go on for more

Yeah as long as I don't pay anything, It's allright, but I'll miss my R34, will they repair it or give me all the money?

Last time, my cousin crashed and badly damage, the insurance company gave her the sum of money that she payed for the car so she got a new car, If I got the money , I get a chance to buy a new R34 even though stamp duty and insurance will cost me again :(

Erik - they will only give you the money for the car if it is a write off - other wise they will repair it. Also they probably won't start work on your car until she pays her excess... and they can't force her to pay it until her car is fixed.... She may pay is straight away - or she may pay for it when her car is fixed. Sorry - I think you'll be waiting longer than 2-3 weeks.... I waited 6 weeks and Aidwin waited even longer.... all cause of parts.

Originally posted by memphis

hey cut the dude a little slack :D, i think i would be speaking jibberish if someone smashed into my car. exp if it was in a garage!

I was speakin jibberish when I crashed my car, hang on... thats cause I was blind. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...