Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

bd4s went out of business about a month ago, although tom (i think thats his name) who owns the property and the dyno is still doing tunes and selling parts,

ive had all my work done there now i dont know where to go, can any one recommend some where good for a turbo upgrade around the same area

Yeah, I had some work done by them, good services, good facilities and Tom is a nice guy too.

What sort of problems anyone know? hopefully not with hks, aren't they the only hks pro dealer in nsw? is someone else taking over the hks business?

yes, and how would you know they overcharge if you have never been there? get a grip. BD4s have been in the modern performance car game for probably the better part of 15 years. actually probably more than that. it's a shame they are gone.

quotes my friend... i never went through with anything though...

friends did, they had a larger pocket then me, and were happy with the work :thumbsup:

just my personal observation... freedom of speech states im allowed to voice it :(

just my personal observation... freedom of speech states im allowed to voice it :(

certainly. and BD4s are allowed to call it libellous and try punish us in a court of law. and then I'll remind you there is limits to freedom of speech, and that what you say (well type) on this forum has to be within it's rules (and the rule of law in our country). and in this case I'm the judge, jury and executioner. this forum is not australia. or america. or dr-doofs utopia. it's SAU and it's a dictatorship and the admins are it's dictators. :thumbsup:

all that aside I just thought it was a useless post. why you'd want to bad mouth a business that has closed down is beyond me. particularly as you never had any work done there. quotes are one thing, you claimed they overcharge which is pretty hard to gauge unless you've had work done, and been charged for it. which you haven't.

they were definately an asset to our scene and prices being high or low is pretty subjective. I can change turbos for $50 by removing the old one with a sledge hammer and installing the new one with cable ties. or someone else can do it properly for $500. if you got the two quotes you might think my 'turbo replacement' quote sounded reasonable. afterwards you'd wish you went and spent $500 doing it with the other guy.

FTR I've never had any work done at BD4s ever and I've only dealt with them once, but it was a good experience. so I can't comment on their price vs quality. but I have seen the work they do and it was good. and the service they gave me was also very good.

certainly. and BD4s are allowed to call it libellous and try punish us in a court of law. and then I'll remind you there is limits to freedom of speech, and that what you say (well type) on this forum has to be within it's rules (and the rule of law in our country). and in this case I'm the judge, jury and executioner. this forum is not australia. or america. or dr-doofs utopia. it's SAU and it's a dictatorship and the admins are it's dictators. :D

all that aside I just thought it was a useless post. why you'd want to bad mouth a business that has closed down is beyond me. particularly as you never had any work done there. quotes are one thing, you claimed they overcharge which is pretty hard to gauge unless you've had work done, and been charged for it. which you haven't.

they were definately an asset to our scene and prices being high or low is pretty subjective. I can change turbos for $50 by removing the old one with a sledge hammer and installing the new one with cable ties. or someone else can do it properly for $500. if you got the two quotes you might think my 'turbo replacement' quote sounded reasonable. afterwards you'd wish you went and spent $500 doing it with the other guy.

FTR I've never had any work done at BD4s ever and I've only dealt with them once, but it was a good experience. so I can't comment on their price vs quality. but I have seen the work they do and it was good. and the service they gave me was also very good.

come now... i thought the club and the forums were seperate :(

also, all that was unnecessary, i have also seen the work they did, they were pioneers, leaders in the business, doing what others couldn't... i never said their work was shonkey, i basically said im a tight arse...

didn't have to go all lawyer on me :(

Pm also sent :P

yeah I'm talking purely about forum here. SAU is the forum. SAU NSW is the NSW club. I'm an admin of the forum, but hold no office, or power in the club. currently we are posting on the fourm. it's run by admin.

but dr-doof is right i got a bit carried away. slow afternoon and my arthritis is playing up.

but it is the task of mods and admins to protect the forum owner from any possible claims. which is why sometimes we may seem a bit draconian, but actually we are just protecting our greatest asset (Prank) who started the forum and runs it for us out of his own time and money. :(

The workshop part is going to be sold from what Tom was planning, but Tom is keeping the Dyno room, office etc for selling parts and dyno tuning.

Paul and Tom went their own separate ways in the business (BD4's).

There is going to be a name change for the new business.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...