Jump to content
SAU Community

Recommended Posts

Hey People,

You may have seen the odd post about these from time to time or even ones which I have sold previously. Basically these Light Up Skyline Garnishes can be wired up with ease to work with brake lights or constantly switched on with your parkers, and should hopefully be available in various colours and look much brighter than the factory unit, as you can see.

The total price of these Garnishes will be around $300, less without the supply of the lighting. I am also may be getting some to have a 'stealth' appearance during the day when turned off, (no clear looking letters as you can see with the silver one thats not lite up) this element of stealth may come at a small additional cost.

So if you have been wondering where to score one or have tried making one of these trick pieces for the back of your liner, wonder no more! If you genuinely you would like one of these please post here (no chit chat please) with the colour and model of your car (R33 Series 1 or 2) and I will be sure to get back to you very soon.

The colour of lighting is only limited by your imagination so ponder away! Although most popular is the red and white lights (note that the grey one with red lights is still in primer/undercoat and not finished).

Thanks.

post-30339-1183332258_thumb.jpg

post-30339-1183332370_thumb.jpg

post-30339-1183332456_thumb.jpg

post-30339-1195049459_thumb.jpg

post-30339-1195049498_thumb.jpg

post-30339-1195225536_thumb.jpg

post-30339-1195225566_thumb.jpg

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

how easy are they to install, mine doesnt look to easy to remove/replace

It is a very simple installation, you just need to remove the plastic boot trim/panel from the inside of your boot then its 4 nuts and your out!

I will write a tutorial on installing them once they some are sent out

hey i have 2 of those garnishes if you wana buy off me to make em lol i dont evn use it coz got my original one back on so other 2 are just spares sitting there looking pretty.

It is a very simple installation, you just need to remove the plastic boot trim/panel from the inside of your boot then its 4 nuts and your out!

I will write a tutorial on installing them once they some are sent out

sorry mate, on closer inspection i can see how easy it is to do

i will contact you in a couple of weeks when i have some spare cash

Hi mate what is used to make them light up leds etc????

Also what do you do for the S1 panels as they are not colour coded to match the paint?

Led's are used. and they are painted to match the body color mate :thumbsup:

Hi mate what is used to make them light up leds etc????

Also what do you do for the S1 panels as they are not colour coded to match the paint?

Led's are used. and they are painted to match the body color mate :thumbsup:

Thats right! The colour is matched exactly using the paint code for your cars colour.

The finished product looks almost identical to the factory body coloured series II garnish. Obviousy the series II has the difference of the concave shape though.

Is white a legal colour for lights on the rear of the car? How much extra would red be or is it just an optional extra for same price.

Also when will you be making these, very keen on one :)

Is white a legal colour for lights on the rear of the car? How much extra would red be or is it just an optional extra for same price.

Also when will you be making these, very keen on one ;)

Everyone I have spoken to that does rego inpections etc. and knows about that kind of thing has said that there are no issues with haveing i white. I have had cops pull up behind me various times and they have never pulled me over, let alone say anything about it, as it looks like a factory nissan job.

Although Red obviously carries zero risk for the concerned driver. At this point I'm estimating the red light up panels will be worth a little more than the standard white which I already have.

Will these fit a white 95 R33 GTR?

If so count me in.

Pretty sure they would. I don't think there's any difference in the garnish between GTR's and GTS-T's. I've seen these things in person and they look fantastic! Better than the factory ones you can get which light up green. Hope you haven't forgotten my order Nick ;)

Everyone I have spoken to that does rego inpections etc. and knows about that kind of thing has said that there are no issues with haveing i white. I have had cops pull up behind me various times and they have never pulled me over, let alone say anything about it, as it looks like a factory nissan job.

Although Red obviously carries zero risk for the concerned driver. At this point I'm estimating the red light up panels will be worth a little more than the standard white which I already have.

White is illegal as only white light is allowed to be emitted from the front of your car constantly. Reason being is people will get confused and think you are stuck in reverse. Anyhow, same applies for the front with red light.

Are you going to post some examples of the ones you are working on? I need to see some before I go ahead. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...