Jump to content
SAU Community

Recommended Posts

Hey People,

You may have seen the odd post about these from time to time or even ones which I have sold previously. Basically these Light Up Skyline Garnishes can be wired up with ease to work with brake lights or constantly switched on with your parkers, and should hopefully be available in various colours and look much brighter than the factory unit, as you can see.

The total price of these Garnishes will be around $300, less without the supply of the lighting. I am also may be getting some to have a 'stealth' appearance during the day when turned off, (no clear looking letters as you can see with the silver one thats not lite up) this element of stealth may come at a small additional cost.

So if you have been wondering where to score one or have tried making one of these trick pieces for the back of your liner, wonder no more! If you genuinely you would like one of these please post here (no chit chat please) with the colour and model of your car (R33 Series 1 or 2) and I will be sure to get back to you very soon.

The colour of lighting is only limited by your imagination so ponder away! Although most popular is the red and white lights (note that the grey one with red lights is still in primer/undercoat and not finished).

Thanks.

post-30339-1183332258_thumb.jpg

post-30339-1183332370_thumb.jpg

post-30339-1183332456_thumb.jpg

post-30339-1195049459_thumb.jpg

post-30339-1195049498_thumb.jpg

post-30339-1195225536_thumb.jpg

post-30339-1195225566_thumb.jpg

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

how easy are they to install, mine doesnt look to easy to remove/replace

It is a very simple installation, you just need to remove the plastic boot trim/panel from the inside of your boot then its 4 nuts and your out!

I will write a tutorial on installing them once they some are sent out

hey i have 2 of those garnishes if you wana buy off me to make em lol i dont evn use it coz got my original one back on so other 2 are just spares sitting there looking pretty.

It is a very simple installation, you just need to remove the plastic boot trim/panel from the inside of your boot then its 4 nuts and your out!

I will write a tutorial on installing them once they some are sent out

sorry mate, on closer inspection i can see how easy it is to do

i will contact you in a couple of weeks when i have some spare cash

Hi mate what is used to make them light up leds etc????

Also what do you do for the S1 panels as they are not colour coded to match the paint?

Led's are used. and they are painted to match the body color mate :thumbsup:

Hi mate what is used to make them light up leds etc????

Also what do you do for the S1 panels as they are not colour coded to match the paint?

Led's are used. and they are painted to match the body color mate :thumbsup:

Thats right! The colour is matched exactly using the paint code for your cars colour.

The finished product looks almost identical to the factory body coloured series II garnish. Obviousy the series II has the difference of the concave shape though.

Is white a legal colour for lights on the rear of the car? How much extra would red be or is it just an optional extra for same price.

Also when will you be making these, very keen on one :)

Is white a legal colour for lights on the rear of the car? How much extra would red be or is it just an optional extra for same price.

Also when will you be making these, very keen on one ;)

Everyone I have spoken to that does rego inpections etc. and knows about that kind of thing has said that there are no issues with haveing i white. I have had cops pull up behind me various times and they have never pulled me over, let alone say anything about it, as it looks like a factory nissan job.

Although Red obviously carries zero risk for the concerned driver. At this point I'm estimating the red light up panels will be worth a little more than the standard white which I already have.

Will these fit a white 95 R33 GTR?

If so count me in.

Pretty sure they would. I don't think there's any difference in the garnish between GTR's and GTS-T's. I've seen these things in person and they look fantastic! Better than the factory ones you can get which light up green. Hope you haven't forgotten my order Nick ;)

Everyone I have spoken to that does rego inpections etc. and knows about that kind of thing has said that there are no issues with haveing i white. I have had cops pull up behind me various times and they have never pulled me over, let alone say anything about it, as it looks like a factory nissan job.

Although Red obviously carries zero risk for the concerned driver. At this point I'm estimating the red light up panels will be worth a little more than the standard white which I already have.

White is illegal as only white light is allowed to be emitted from the front of your car constantly. Reason being is people will get confused and think you are stuck in reverse. Anyhow, same applies for the front with red light.

Are you going to post some examples of the ones you are working on? I need to see some before I go ahead. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
    • Oh nah, S55 doesn't eat bearings, just the crank hub slips lol.
    • When’s the tow ball on the 33 coming? 🙃
    • I welcome any basic question that can help haha. Yes it has 2 unis but the driveshaft is a one piece and the unis are welded without a slip yoke at each end.   What's funny is anytime I've ever had wheel vibrations it's always been in the front so I automatically assume it will lead to steering wheel shake and not chassis vibration. With that being said, I never considered looking at my rear wheel balance... I have doubts though as this wasn't an issue before I pulled the motor and trans but is still very much worth a look. I'll do that tonight after work. Thanks. 
×
×
  • Create New...