Jump to content
SAU Community

Recommended Posts

hey guys, i need some feedback.

last week i got done doin 75 in a 60 zone in murray bridge by a laser gun. later that day a bloke i work with said they can't do you for speeding if your traveling down a hill/slopped road. Is this correct?

I had only JUST come off the freeway so traveling at 120 for an hour and a bit makes 75 feel like 40.

any thoughts appreciated.

cheers Ryan

Link to comment
https://www.sau.com.au/forums/topic/175046-speeding-fine-question/
Share on other sites

I remember reading some speedcamera usage guide or soemthing along those lines but it was a while ago so the technology may have changed.

A few things I remember that they are not supposed to do.

1. Not to be used in rain

2. not to be used in fog

3. not to be used down hill

I was pinged down a hill on my very first speeding fine so Im not sure how accurate the document i read was. Either that or the police don't follow the guidelines. :)

yea the rule is under 15 $179. over 15 $279 and if you go over 25 kiss your licence and wallet good bye.

Hill or not they will ping you! BTW if it came through as your speed was only 15 over it means you were actually detected going faster than that because they knock of a % margin to rule out any comebacks.

I think they changed the laws quite a while back. I too remember the whole "can't get you going down a hill" thing, but they also never used to be able to hide the camera either... looks like they can get you speeding any way they like these days. BTW, if it was a laser gun they have to pull you over and give you the fine on the spot don't they.

there are plenty of documents out there available for the public

google

cant set up speed detection devices on bends, on slopes, on areas with a lot of concrete, near signs, across lanes of traffic, cant hide the cameras either - they need to be clearly visable, etc etc etc, cops still do all the above tho. It is written into their regulations and guidlines on how to operate these units.

good luck fighting it tho.

use your right, take it to court.

doesn't matter if your going down hill, your still speeding, don't bother trying to contest it

fixed speed cameras will get you if you're doing 10% greater than the speed limit

both these facts verified with a cop

it certainly does matter if your going down hill and NOT[/] speeding

early last year i got pulled over and alleged i was doing 147 in a 100 zone this was round a bend near nice shinny high street lights @ gawler ive fought it all the way and got on them to say i was doing 90 in a 80 zone no dangerous driving no conviction no LOSS of license to which is a huge inconvenience for me

BTW i wasnt doing much over 110 in the 100 zone

the laser guns are a crock they a so inaccurate its not funny and then there is the procedure of calibration which they would like you to think happens every week every time the gun is knocked say in the officers saddle bags its putting the lazer out of wack

Them radars and laser guns are very inconsistant. by changing lanes (ie: moving sideways or even going around a curve) it severely changes the output from the units.

hence they cannot be set up on bends. however i watched a program debating the use of these by the police and defence in court etc etc.

End of the day, chin up and pay the fine otherwise you'll end up paying more out in court anyway. unless it would result in loss of licence.

Im a radar technician (no joke its part of my job at work with electronics), and yeh these radar guns they use are crap, basically its hard to get an accurate reading due to the factors that reflect the radar waves. they have even got readings of 20km/hr on a rock wall, its all to do with the doppler effect and the reflection of the radar waves that are transmitted. Basically but its much easier to pay the fine than take it to court to fight for your $100.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...