Jump to content
SAU Community

Recommended Posts

just a quick question, wondering wat sort of power a stock gtr gearbox (roughly 100,000kms) is capable of holding before you start pushing it to its limit??

i know there are a few ppl that will say, depends wat clutch you got? and depends how you change gears?

but im just looking for a rough idea.

thank you.

Link to comment
https://www.sau.com.au/forums/topic/175859-gtr-boxes/
Share on other sites

yeah ok thanks. i was just crusing around the forums and found a lil info on some boxes and stuff. just so you have more of an idea, im running a t51r, 2way lsd and a giken triple plate. i didnt really wanna push it past 400rwkw, but am starting to think, why such a turbo if im not gonna open it up, so im now trying to work out wat box to run. a friend of mine has a trust 6 speed straight cut (quiaf or watever) for sale, but am concerned about rumours that i need to rebuild it every 5000km??? this is somthing that i am not keen on, should i be concerned?

the car will be mainly street driven on special occasions, but will hopefuly make a few track meets and drag events, if all holds together. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/175859-gtr-boxes/#findComment-3220774
Share on other sites

Your combo is a recipe for lunched boxes, haha no disrespect just as you are obviously aware the standard item isnt going to be up to that turbo, clutch or diff!!!

PPG from personal experience are awesome.

OS are good and economical so make a good option and would suit your purpose.

Trust had no personal experience so I wont comment on hear say!!

Edited by Fitzpatrick Speed Works
Link to comment
https://www.sau.com.au/forums/topic/175859-gtr-boxes/#findComment-3220902
Share on other sites

Depending on how you change and what clutch you have can factor in how long your box will last, power shouldnt matter unless your going over 600rwhp and wanting to blast gears

I destroyed box1 with 390rwhp with exedy twin plate shifting to fast and dropping the clutch

I destroyed box2 with morehp with the same clutch shortly after the drags, first started the noises from box then bang when i shifted

The third box has being fine and lastest for ages because iv treated it nice and shifted normal ..

once there into gear there fine

treat it with love and your fine

Link to comment
https://www.sau.com.au/forums/topic/175859-gtr-boxes/#findComment-3239053
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...