Jump to content
SAU Community

Recommended Posts

Hi I have recently purchased an R34 25GTT, and was wondering what petrol to use.

I have gathered that 95 Octane is suitable, yet i pumped V-Power from Shell, which was a little bit more expensive. Just wanted to find out what others out there with similar imported cars prefer to use, and if 95 is good enough (i.e. that it wont damage the car like normal unleaded would)

CHeers.

Link to comment
https://www.sau.com.au/forums/topic/176015-r34-petrol-choices/
Share on other sites

32 , 33 or 34 i would highly highly highly recommend premium.

BP ultimate, shell V power, or mobil's premium one (cant think of the name), are the only 3 i consider. i personally wouldnt use 95, i stick with BP which is 98. use it 100% of the time and works for me.

this has been covered a bit before so try a search and im sure you will read more posts about it.

dude, there's no ' R34 petrol choices ' LOL. Basically most of the skylines, silvias, supras are similiar. Just stick to 98 Octane and you'll be fine. Doesn't really matter Shell V-Power, BP Ultimate, Mobil Synergy 8000, Caltex Vortex 98, these 4 are the most popular choices. Different people may argue Shell is better than Caltex blah blah blah, but they are basically the same. :D

Like other people have said, stick with 98 octane (or better). Also you will get best results if you stay with the same brand of fuel too.

I'd stay away from anything less than 98 octane unless you have to use it (ie. in the country). Your fuel economy will likely be better with 98 octane anyway so the overall cost will probably not be that different. Its also better for your engine so it will save you money in the long run :D

Just like everyone said, 98oct would be ideal but if you are a real tightass, 92/95oct would be fine if you dont thrash your car. Thrashing your R34 on 92/95, your motor will ping its head off and eventually couple of cylinders (if you are lucky enough :( ) will come flying out from your block.

I know a few guys that were using 92/95oct in their rexies, skylines and 200s due to the high fuel prices couple of months ago, most of these boys were driving in excess of 100km per day so saving every cent mattered.

Just like everyone said, 98oct would be ideal but if you are a real tightass, 92/95oct would be fine if you dont thrash your car. Thrashing your R34 on 92/95, your motor will ping its head off and eventually couple of cylinders (if you are lucky enough :D ) will come flying out from your block.

I know a few guys that were using 92/95oct in their rexies, skylines and 200s due to the high fuel prices couple of months ago, most of these boys were driving in excess of 100km per day so saving every cent mattered.

I've heard this argument many times, but given that using 91octane fuel (which most regular unleaded is) is risking blowing your engine, ask yourself if it really is cheaper for the sake of $5 a week in savings...

In my opinion spending a little extra on fuel (its not that much really) is very cheap insurance and protection for your engine :(

I've heard this argument many times, but given that using 91octane fuel (which most regular unleaded is) is risking blowing your engine, ask yourself if it really is cheaper for the sake of $5 a week in savings...

In my opinion spending a little extra on fuel (its not that much really) is very cheap insurance and protection for your engine :)

yeh agreed.. when it comes down to it, the savings are quite minimal, and you relly got to look at the longer term.. i mean u could sacrifice a cup of coffee, or pack of smokes rather than risking ur baby :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • I'm interested,do you still have it?
×
×
  • Create New...