Jump to content
SAU Community

Jacking Up The Car

Lady_Woogy

By Lady_Woogy,
in General Maintenance

 Share

Recommended Posts

jrocket Proficient

jrocket

Posted
Posted

On the back of the car i put the stands under the frame of the suspension. There is kinda of solid frame work around the drive shafts near the diff. Like U shaped. But yeah i just lift up the back with the jack under the diff or something then slip the stands in under this frame work.

sometimes i just lift the car up n put bricks under the wheels then let it back down so that its then higher up off the ground. Depends on what you want to do.

I am starting to consider gettins some ramps to get the car off the ground faster and less mucking round.

You could put the stands under teh chassis or something. I do that sometimes but thost shitty stands from auto barn dont seem to have a wide enough top on them and it kinda starts bending teh chassis tubing.

I also put a block of wood between the trolley jack and the chassis if lifting there just to ensure i dont damage the car.

SECURITY Grand Master

SECURITY

Posted
Posted
peice of wood on top of a troley jack..

Under front cross member..

or rear diff..

ever had a piece of wood slip from under the trolley jack? ive seen it happen a few times. 1 cracked a radiator, the other took out the whole power steering system from the car slipping off it. dont do it.

of your jack isnt big enough dont try, and if your worried about wrecking the cross member, you wont.

MANWHORE Grand Master

MANWHORE

Posted
Posted

So many mechanics like to jack the cars by the sills. My sills haven't been touched. that's why I work on my car myself.

I know that bending the sills probably doesn't do anything, but i like my car to be perfect, so i don't want someone coming along and bending them!

jrocket Proficient

jrocket

Posted
Posted

Hmm I just remembered bout this paddock bomb subaru i had. This car was so rusted out that when y put the jack on the sills n tryed to lift it up, the jack would just push the whole floor up. Was finding it hard to find some solid parts. Think we ended up just lifting it by the diff and crossbar.

WRRR Rising Star

WRRR

Posted
Posted
heres some other recommended jack points.

post-29392-1184303842_thumb.jpg

If your lifting the whole car up jack under the front x member, put in front stands on the sill jacking points. Then jack under rear diff and place rear stands on the sill jacking points.

You should get some sill protectors - bent up metal like your normal scissor jack - make sure you put locator tabs on the underside to stop them slipping on your stands, you can buy some rubber blocks with a slit cut out for the sill join (hard to find) or make up some hardwood blocks with a slit cut in them to take the sill join (that's what I did). Car has sat on stands like that for months with no ill effects.

I can't understand why people would put their car on stands knowing they are going to crush the sill join without some appropriate blocks. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...