Jump to content
SAU Community

Recommended Posts

I turned a corner at about 20k under (yes under) the speed limit.

Unbeknowns to me, there had been road works during the day and the speed limit had been reduced to 40, these signs had since been taken away.

Furthermore there had been an oil spill that day which was covered with sand/sawdust.

Unfortunately for me the signs had been taken away and the rain washed the sand/sawdust away so here i am travelling around a corner, with oil on the road, at night in the rain, going under the speed limit.

Long story short my car got intimate with a tree.

If i didn't have comprehensive insurance i would be suing the council/workers or SOMEONE for taking the speed signs and oil spill signs away.

But i do, and behind every cloud and all that... so now i'm in the market for a skyline i think (form a lancer :rant: ).

Don't know how much i have yet. Should find out soon. (by wednesday).

Anywho. Just wanted to vent my splein :( Thanks guys, (PS any suggestions on car to buy, looking at between 9-11k, 12k pushing it a bit). PS. i'm on my P's (but i did get them a year and a half ago so i can get a turbo car).

Thanks for listening! PS. i drive like a grandma so don't tell me i'm a hoon or deserve it please!

Link to comment
https://www.sau.com.au/forums/topic/176423-well-last-night/
Share on other sites

not really mate, cops will do you for power to weight ratio now if u had a turbo.

unfortubate what happened to your car.

if i was you get a non turbo skyline for now, and then in 18months bolt a turbo to the side of it. will save u all the headaches from the cops too.

see how u go

Link to comment
https://www.sau.com.au/forums/topic/176423-well-last-night/#findComment-3227832
Share on other sites

not really mate, cops will do you for power to weight ratio now if u had a turbo.

unfortubate what happened to your car.

if i was you get a non turbo skyline for now, and then in 18months bolt a turbo to the side of it. will save u all the headaches from the cops too.

see how u go

Just because a car has a turbo in it doesn't mean its over the power to weight ratio.

A 180sx turbo is fine, so is a r32 gtst (1991-1993 model 2 door) in my understanding.

No evidence ever gets shown for this on this forum though :rant:

I'll give vicroads a call tommorow to make perfectly sure.

Link to comment
https://www.sau.com.au/forums/topic/176423-well-last-night/#findComment-3227894
Share on other sites

Yeah, the insurance company would probably do all they could to get out of it, that's why i'm not gonna push the oil point, i mentioned it to them, and made a complaint to the council.

The thing is, i don't want some long, dragged out investigation where i don't see my money for like a year. I need a car for uni.

But yeah, pretty sure i'll be getting a 32-gtst :D I'm hoping for exhaust and maybe front and side grill/skirts, anything else would be a bonus.

Link to comment
https://www.sau.com.au/forums/topic/176423-well-last-night/#findComment-3231938
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...