Jump to content
SAU Community

Recommended Posts

Hey all,

well with these cold mornings ive loved driving my car... although the colder it is the higher my Autogauge Boost Gauge reads... it looks like its hitting 19.5 (cant really concentrate on it or id end up in the other lane).... where as my Profec is set to 18psi and never goes over 17.9 or there abouts.....

now my EBC is attached to the Fuel Reg, and the Autogauge is attached to the stock outlet on the intake manifold....

so which one would you trust.... im thinking my EBC, but just wondering why my other gauge would read higher?

THanks Yall

Link to comment
https://www.sau.com.au/forums/topic/176874-which-boost-gauge-would-you-trust/
Share on other sites

there is always going to be some discrepancies between different gauges. essentially they are both reading from the same place. just because the ebc is digital doesn't mean it is mroe correct. the map sensor may not be calibrated 100% correct. but then a needle guage isn't as specific when you read it. it depends on what part of the needle you read from and how well it was calibrated also. i would probably say the ebc though.

The Autogauge is an Electronic, Smoked Series.....

But im pretty sure the EBC was reading the same to the boost reading on the dyno now that i think about it.......

lower values its spot on just when it gets high it becomes inaccurate....

But $400 vs $90 is a big difference in price and quality IMO

The Autogauge is an Electronic, Smoked Series.....

unfortunately they are pretty crap, but what do you expect for $90 :domokun: i thought it was auto gauge from autometer but they are also average.

Get guages which have an stepping motor in it.. such as defis, pivots.. etc.. They are more accurate!!

I got a pivot one myself.. love it!! looks so much better!!

plus mine is built in electronic guage.. no need for a control unit..

but dont copy me now lol

Edited by siddr20

Now im in the same boat here, bought an Auto Meter gauge new Ultra series 2 1/16" and it says im hittin 7 psi low boost and 14 on high but stock gauge reads around 6 low and +7 high, now i'm running a supposed stock r33 with an 3' turb back with dump and pod filter, i noticed that my ECU seems to be an Nismo havn't pulled it out yet could this be the culprit?,

oh im running stock intercooler too, going to start a new thread and ask.

  • 2 weeks later...

i also started noticing this today. got a sotck GTST seires 2 R33 running stock boost with only cat back exhaust. my stock boost gauge shows on full throttle running 5-6psi but my Apexi boost gauges shows 0.5bar (which im pretty sure is 7psi am i correct)

so imguessing my stock boost gauge is buggered??? or theres something wrong

the stock boost gauge on the dash does not show numbers in PSI, it has a different measurement. mmhg or something?

ahhh ok but what i ment was the stock boost gauge shows -7 0 +7.

-7=vacum obviously

0 and +7 is boost so on a stock r33 that +7 would be full stock boost so when you put your foot down at full boost needle should be at +7 yes???

mine only goes between half way between 0 and +7.

iv been told the +7 is 7psi but like you said the stock boost gauge dosnt messure in psi something different so im confused.

this goes out to r33 owners. does you boost gauge read all the way to +7 on open throttle???

my Apexi boost gauge shows 0.5 bar on open throttle so im guessing thats 7psi. am i correct?

No, if it's hits the +7 on the dash/standard gauge, that's more like 14psi

Its hould only go about half way for 7psi...so it's all good :)

BTW, i got a 2nd hand Blitz mechanical gauge of ebay deliver for about $20 and it's sweet as ! ;)

No, if it's hits the +7 on the dash/standard gauge, that's more like 14psi

Its hould only go about half way for 7psi...so it's all good ;)

BTW, i got a 2nd hand Blitz mechanical gauge of ebay deliver for about $20 and it's sweet as ! :glare:

thanks for that dude. that clears up everything WOOT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...