Jump to content
SAU Community

Recommended Posts

The other day when coming out of my work carpark, my car (r32, rb20det) lost all compression and moved like a slug.

I dropped it off at my mechanic who has just informed me that it has extremely low compression and a rattling noise in the engine. This means that it isn't combusting fuel properly and well...just not going.

I think that I have two options now:

1. Strip down the engine and find out what's going on

2. Replace the engine

Would anyone have any suggestions in what could have happened? Or any other options I might have?

Thanks.

Option 1: Would mean labour costs plus rebuild if your intending to keep the RB20 and add forgies

Option 2: Replace it with a second hand RB25DET or another RB20 if your tight on funds, make sure you get a leak down and compression test on them before purchase.

i'll personally prefer a cheap RB25 and wack it in there.,

Were you giving it stick at the time of coming out the car park? Generally speaking motors just dont die and lose compression like that unless they have detonated (cracked ring lands, bottom end bearing and various other things could be damaged) or your oil pump has died causing bearings to run dry and spin.

If the motor is stuffed, i'd look into replacing it with an Rb25 (minus the box) and take it from there, you can get them for around 2200 with ecu and loom + all bolt ons.

I like GT shortie's second option.

Rb20s are cheap as chips (<1k). Rb25, more.

If I were to blow my engine, that's the option i'd be taking. Sure, building an engine will make a stronger engine, but they cost a lot. The stock one will take a good whack of power if you look after it.

i'll look into swapping to another rb20. i've already got all the supporting systems for it and it'll probably be an easier swap without having to worry as much about wiring etc.

are compression and leakdown tests able to be conducted on an engine not in a car?

by all means put in a second hand RB20, BUT make sure you figure out why the first one went bang so you don't do it to the new one (ie, dud fuel pump? bad tune? broken injectors?...)

well, everything was given the twice over and it came back to the engine itself. the fuel pump, injectors and tune were apparantely retested and still running a stoich mixture but the engine is just losing compression somewhere. there is also a worrying rattle inside the engine somewhere which sounds like a loose bearing.

For the price of a 25..

you can get a 20.. and some nice mods..

Better off spending money on a 20 and mods..

see if you can repair the 20 and sell to make a little bit of money for more mods..

well, everything was given the twice over and it came back to the engine itself. the fuel pump, injectors and tune were apparantely retested and still running a stoich mixture but the engine is just losing compression somewhere. there is also a worrying rattle inside the engine somewhere which sounds like a loose bearing.

well it shouldn't be running a stoichiometric AFR anywhere except at cruise (light throttle, low load) if it's running stoich anywhere else then you have big problems.

anyway, I would do your best to pin point exactly what killed the motor as it wont be much funning fitting a new one then going through it all again.

it's running stoich at low load and off boost and a tad rich on boost. not sure of the exact afr's tho.

would it be worth paying for the motor to be stripped down to find out what's wrong before going further?

If they just tested ur fuel pump by adding power and not running in a motor it doesnt mean too much.. Could have been leaning out under boost and running to lean for a while. GTS4WD U could get another with some mods, to catch up to a 25 and then some. Or u could just get the 25 and the base right there for some really good potential. All comes down to how much cash u wanna spend. Spend ur cash now on a 25 and get better results later with mods or spend the same amount on a 20 with mods and have more power than a stock 25 with lower gains for all the mods u do in the future.

Liam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...