Jump to content
SAU Community

Recommended Posts

Thanks for that Ben, I've been to Blackmans before so I'll give them a buzz. Wasn't entirely happy with the job they did on my door trims, but hopefully they don't flock this one... wait, hopefully they do...wait... :wacko:

Steve: That would be handy for door trims actually, butt for the dash I wouldn't bother, I reckon flocking will be easier.

Tacker: I saw those kits in the states, don't know if I'd trust myself!

Steve: That would be handy for door trims actually, butt for the dash I wouldn't bother, I reckon flocking will be easier.

Mmm, ive just had a look around google, cant seem to find a place in sydney that does it

Ill keep looking :wacko:

(going to deca? See you there! Im keen to have a look at your 180)

Stuart: I've left a message for Blackman's about the dash, so I'll let you know what the cost is. The Alcantara looks the goods mate. Any more update pics? Wanna swap? :wacko:

Steve: I doubt it mate, won't be ready... as usual. I'm still waiting on my plenum... and those Porkas really tempted me... :)

Fair enough, i was hoping to bring the gtr this time but yeah - same. It wont be ready :wacko:

No clubby then? :)

Got to admit those porkas are fkn sexy with the rsr bodywork......would hate to see the price for parts when doing one up though

I think you could tell if I'd done it Steve!

Was done by a local upholstery guy that does some race car trimming work including re-doing suede steering wheels.

Was $100 or $150 from memory for all three pieces which I was pretty happy with as sourcing replacment plastics would have been heaps more.. my ones were all scratched from when I got the car. He also blanked over the heater controls and ashtray to keep it tidy.

Took the front and much of the engine bay crap off it last week.

Trying my new seat that arrived today later tonight along with further distruction... not sure how the seat will go as it has head support wings and its a tight cabin space.

Like the carbon detailing in the boot (in the vents and washer bottle hole)?

post-5400-1224569422_thumb.jpg post-5400-1224569434_thumb.jpg

post-5400-1224569456_thumb.jpg post-5400-1224569445_thumb.jpg

Edited by t01-100

Looks the goods mate, and that seems like a really good price for the retrimming. I'd be happy with that!

Steve: After doing Haunted Hills, I think the clubbie has had enough track stuff for the moment. The brakes are on their last legs and I want them to last me to my next service :wacko: And it's just not as fun as in the 180...

I love alcantara... and I love this thread!

*off topic*

have been watching some old Aus Group C footage recently and its made me want a track prepped Bluebird with massive flares and slicks... eeeew so ugly... sooo 80's.... what's wrong with me! awesome racing tho, go George Fury!

I want to get my dash flocked or alcantara...ed too!

I can stuff it up myself for free, but has anyone found a place in Sydney who can do a decent job of it?

Marlin: I've always wandered if those engine damper things did anything... What did it do that makes you love it so much?

hang on a minute. Aren't we talking racing machines here? When did a race car need a suede cluster?

To reduce glare.... I really really really should have thought twice before opting to paint the entire interior bright white :P :P

Those guards look hot.... You're gonna need a little more race tape though :(

lol, i just started painting my interior in silver hammer tone....

If you see them up close they look rubbish, but thanks for the compliment :P Rears are ok but the front left is terrible. pop rivets and bog can fix that though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
    • To drain the Intake Heat Exchanger, there is a crappy drain plug in front of the driver's side front tyre: You should use the largest headed phillips screwdriver you had, and in my case I needed vice grips on the hose above as the plug was tight (tighter than it needed to be, since it has an o-ring seal).  After you have a tray down and open the drain, open the intake heat exchanger reservoir cap (drivers side one) and you should get a couple of litres of coolant To get to the radiator, you need to remove the plastic engine undertray. It is held on with a series of 10mm headed bolts and some clips. For the radiator, there is another type of crappy drain (kind of like a plastic banjo bolt) and you should attach a length of hose to direct the stream of coolant per this pic (otherwise the coolant hits the rad support and goes everywhere). The drain is on the rear of the radiator on the driver's side and a bit hard to find. Put a big tray or bucket down (5l won't be enough) and slowly unscrew the fitting by hand. You only want to remove it far enough for coolant to flow, it you unscrew it right out the whole fitting and direction pipe will come off and you will get a coolant bath (yum!). Undo the radiator reservoir cap and it should empty about 8l
    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You also need to drain the intake heat exchanger to remove the radiator so you will need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. 2 other tools that really help dealing with coolant lines and spring clamps are Bent Needle Nose pliers Hose pliers Between them they will reduce the frustration (and injury) potential by about 1000% Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
×
×
  • Create New...