Jump to content
SAU Community

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

As much as you lot go on and on about the GTRs and bathurst, the only one they won the race was red flagged.

LOL!

how come no one picked him up on this?

what about '91? forget about that eh? oh- you were 7 years old, sorry =P

fark.. how many of you clowns have horse blinkers on?

the fastest stock turbo'd AUTO soarer in aus runs 12.3 using stock turbo's as stated, darg radials, MV auto's stage one shift kit (no stall converter).

making 230rwkw.

let's a GTST (r32 or R33) do the same...

A stock AUTO TT soarer weighs 1560kg

how is that 600kg heavier than a skyline as some knob put it?

Only problem with the soarer is the fact that it is useless.

it's a 2 door that has piss all back seat room.

piss all boot room.

and yet is a massive car.

Chaser is where it's at.

Which is why im am choosing a soarer over an r32 gts-t as my next car.

well of course the soarer is faster than a 32. they are the slowest of the skylines out of the r32-r34's. soarers without work are in no way quicker than an equally modded r33 or r34. i have been up against a few. the manuals might be very close, but good luck finding one.

Pretty good debate goin on hear guys

Iv got mates that own twin turbo soarers and heres street tested results for ya s. A auto twin turbo soarer will beat a standard or lightly moded auto R33 Gtst but wont beat a manual R33 or R32 Gtst. Like someone else said the soarer has no real purpose besides grandpa s sunday driver or for cruisin. They deffently have power and are a good cheaper alternative but its NISSAN ALL THE WAY for me

Nuff said :santa:

Edited by smackm

this thread is funny..

toyotas answer to nissan would be the new TRD AURION....that would kill a few gtst out there!

http://www.webwombat.com.au/motoring/news_...upercharged.htm

and heres something to compete with everything else..

http://www.webwombat.com.au/motoring/news_...oyota-ft-hs.htm

Edited by infected flow

Aurion ay

supercharged 3.5L V6 with an estermated power output of 315hp might be able to keep up with a standard 185kw that a standard R33 Gtst pumps haha. It is a nice car but its not toyotas answer to nissan its there answer to holden and ford

Aurion ay

supercharged 3.5L V6 with an estermated power output of 315hp might be able to keep up with a standard 185kw that a standard R33 Gtst pumps haha. It is a nice car but its not toyotas answer to nissan its there answer to holden and ford

well actually its on par but better where as the r34 has 206kw at the engine..therefor it would be better and more comfortable the aurion...

hmm sounds like u should get ya facts straight....

if we were talking about all out power thats a different story but we aint...haha you guys were compaing the soarer to the gtst and i was comparing the gtt to the aurion...

cheers.

well actually its on par but better where as the r34 has 206kw at the engine..therefor it would be better and more comfortable the aurion...

hmm sounds like u should get ya facts straight....

if we were talking about all out power thats a different story but we aint...haha you guys were compaing the soarer to the gtst and i was comparing the gtt to the aurion...

cheers.

No offense to you...nor anyone else who uses this figure 206kw.

The figure was made up by manufacturers in Japan in the late 80's

and followed through to the late nineties.

They thought that a KW war would not help the development of the cars...(one thing Holden and Ford here

should have learned from)....and so it was a gentlemen agreement to agree that if any car exceeded 206kw

it would be rated at that.

Everyone knows a GTR KW out of the factory was more like 240KW's odd....

What pisses me off though is some EPA tests conducted use this figure...ie noise DB/REV

Back to the Topic.................................everyone by a gtr this way they grow in popularity

and like the supply and demand curve..(which I have always found it hard to understand)....

the prices will increase............and we will be rich......rich I say...hahahahahahahahah

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...