Jump to content
SAU Community

Recommended Posts

thought i'd start a spotted thread as i see a few old skylines here on the gold coast,

just saw a MR30, midnight purple with spec through out, crome 17" simmons rims, RB engine of some sort, custome purple plates and a RZ motorsport sticker across the side. looked tops....

post up details of cars you may have seen in your area...

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/
Share on other sites

that was in HPI mag last year sometime... i didnt read it though

wass it the one in this pic?

AHH30 was the plate i think? QLD too....

i love this one (NZ though)

thats the one, looks better in the light, so far all the r30's i've seen in HPI i've seen on the streets of the Gold Coast expect Bens White DR30. Mind you one was upside down in the middle of the road completly written off :glare:

that other one pictured looks very nice, great colour too.

Edited by rsx84
Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3260347
Share on other sites

thats the one, looks better in the light, so far all the r30's i've seen in HPI i've seen on the streets of the Gold Coast expect Bens White DR30. Mind you one was upside down in the middle of the road completly written off :(

that other one pictured looks very nice, great colour too.

tho other one is on trademe.nz

he only wants $3000(NZD) for it too! its an $8000(NZD) paint job...

notice how there isnt any bump strips along the doors etc!

post-32896-1185854008_thumb.jpg

post-32896-1185854027_thumb.jpg

post-32896-1185854041_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3260467
Share on other sites

  • 1 month later...

Hi guys, at work today one of my customers came in this old timer HR30 import, ok he says he cant register it in NSW, it has no compliance plates just a manufacture plate.. I spun out when i saw it, It looked like it had a L20 turbo in it. He bought it from perth in the mid 80's for $7000, and drove it back here. He uses it as a workhorse & it shows. He says that everywhere he goes people ask if he wants to sell it.... Also he reckons that its " 1 of only ten brought to Oz" but i wouldnt have a clue, does anyone have an idea?

hr301.jpg

hr30.jpg

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3377315
Share on other sites

Hi guys, at work today one of my customers came in this old timer HR30 import, ok he says he cant register it in NSW, it has no compliance plates just a manufacture plate.. I spun out when i saw it, It looked like it had a L20 turbo in it. He bought it from perth in the mid 80's for $7000, and drove it back here. He uses it as a workhorse & it shows. He says that everywhere he goes people ask if he wants to sell it.... Also he reckons that its " 1 of only ten brought to Oz" but i wouldnt have a clue, does anyone have an idea?

wowzers!

daily driver for sure!

some origional extras too!

I'd say its an 82 or 83 (the thin back bumpers have the black strip in them)

could be a massive job getting it back to standard condition

very interesting though!

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3377903
Share on other sites

oh i keep forgetting to post these up...

<----datsun280zx turbo ad from the 80's

<----- george furys qualifying in the R30 at bathurst

<----- R30 van in japan going sick on a khana?? (sounds like a FJ)

<----- R30 van in japan clip 2 (in car footage... good gearshifts!)
Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3378005
Share on other sites

One of Ten thousand maybe!

Not really, but there were heaps of 4 door HR30's in Oz, similarly KHR30's, although as they get older, less want to keep them on the road so current numbers are fairly small.

It's the Limited Edition's and DR30's that are more rare, although Powerplay Imports were still bringing in DR sedans up until mid last year.

As for the Passage GT on another thread, I have pics & specs in a JDM sales brochure that I will post when I get time.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3395088
Share on other sites

KHR30's,

KHR30, thats a new one to me what does the K stand for? so many variations on the R30's its hard to keep up :laughing-smiley-014:

As for the Passage GT on another thread, I have pics & specs in a JDM sales brochure that I will post when I get time.

Cheers

nice one, that would be good :P

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3396127
Share on other sites

  • 1 month later...

That is my old car (I put the IOF 003 plates on it). Zeb has been trying to sell that machine for nearly 2 years. Unfortunately it looks a little worse than when I sold it. I note a lot of those photos were taken in 2004 when I sold it to him. Still it was rust free and reliable.

Link to comment
https://www.sau.com.au/forums/topic/178783-spotted/#findComment-3476399
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...