Jump to content
SAU Community

Recommended Posts

This is just my thanks to SAU.

When I bought my R33, I had no idea what a turbo was and how it worked, all I knew is that I now had one and it was cool. I did a search and found SDU, posted in the Austrlia section and got told to come over to SAu, which I promptly did. I was then educated on the many working bits of my beautiful piece of engineering. I cant thank enough all those people who took that stupid noob in and slapped some common sense and knowledge into me.

Over the next two years I would be helped out by lots of different people who are members here, both physically and financially. I wont even try to list everyone, because sure enough I'll miss someone, but you know who you all are!

To show just how nice people are on here, I was driving from Rockhampton to Brisbane, late friday night. I stop at Gin Gin, aka middle of no-where, and grab something to eat and go to put petrol in the car. Went to start it up, nothing, just turns over like a trooper. At this point in time I call up RACQ to see what they can help with, not much, he showed that there was power getting to the fuel pump, it was just not going. Now just having a 044 installed no less that 4weeks ago I was pissed, tired and frustrated. Here I was, middle of freakin no-where, stranded, now at 12 middnight.

So I take a chance, and wake up someone from here, a SAu member who I have never actually met before, but only chatted on msn and here with. He's unable to help me, but knows of someone who could. No here is the thing, he calls a mate, another SAU member, and he has never met me, but agree's to come out with a spare 044 and help me get going.

So after 3.5 hours of fault diagnosing the problem is found and the fuel pump re-wired. I offered this guy money, but all he wanted was something to eat and the petrol costs to come out. Then he tells me that I shouldnt press onto Brisbane, but come back to his place and have a sleep, and in the morning he would follow me to Gympie, (300kms away).

So this guy, who was driving 3 hours to gympie, came out to help a total stranger in the middle of the night.

I really want to express my utter thanks, once again to him. But also to everyone who has helped me like that over the years, like when John helped me limp back home after the island incident, or when Mike towed my car back from QLD raceway, for nothing but the petrol costs, or when Marc has helped me out.

I have now sold my stagea, and now gone back to a VS commodore, mainly because it was given to us, and having a mortgage to pay off and not really needing 2 cars, we opted for the cheaper to run.

Thank you so much Christain for continuing to run SAU, thank you to all the admins and moderators that take the time to keep this place awesome, and thank you to all the people who come here and help out others.

I probably wont be online much, no point, the flanno, stubbie shorts and double pluggahs are on order and I am in the midst of growing the best mullet I can get, that will complete the transformation into true bogan.

Without SAU and all the wonderful people here, my life would not have been the same.

Thank you and goodbye, drive safely and remember, real men smoke rubber.

Cy

Link to comment
https://www.sau.com.au/forums/topic/178970-thank-you-and-goodbye/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Hi Cy :whistling:

Sorry to hear about your new fuel pump, but its great that there are people still out there, ready to go that extra mile just to help a fellow human in need :)

Hope the VS works out, and it is a SAD day to see the stag go >_<

Marc and I hope to see you soon anyway.

Love Kazah & Marc

XOXO

Awwww so much love in the room :)

Your positive outlook on, well, everything has helped me on quite a number of occasions, and I don't know whether you were a good (bad? :whistling:) judge of character, but you helped me when I needed it... I appreciate what you did to help me but what I'm most grateful for is your friendship, you really are a top guy and one of the few people who has really touched my life. There's a stack of things we should be thanking you for too mate >_<

Best of luck to you, Nell and the kids, and you better keep in touch biatch!!

I didnt know you for a long time .. but was a pleasure all the same

its nice to see that human decency and generosity to help others still exists

and its also a thing of wonder as to how owning something ( ie a nissan skyline stagea etc) can cause such a feeling of commraderie between people.

Well Cy, as everyone knows we have had our differences in the past, so I would like to say...

wackyplanetshop_1889_13759076.jpg

:(

Thanks for all your help with chasing up the info on my car, and for all the laughs along the way.

Seriously, take care, and make sure you post photo's of your new mullet.

Did you miss this paragraph?

.....

I have now sold my stagea, and now gone back to a VS commodore, mainly because it was given to us, and having a mortgage to pay off and not really needing 2 cars, we opted for the cheaper to run.

.....

Ah the memories, the skids, Dakabin Railway station, the jacobs well runs, the tambo runs, the fight club, pissing the hell out of adrian by being a complete fcukwit, the island, the chilli nights, driving the R33 with no clamps on the cooler piping after Jason slaved away on it for a whole weekend, deafening Marc on his motor bike with my so called "exhaust" which was nothing more than a pipe, organising mystery cruises where even I didnt know where the final destination was, soooooooo many good times were spent right here on SAu with all the great people here.

My life would not have been the same without all of you.

Cy you are going to be missed :( your an absolutely loveable person :huh: your presence on SAU has been truely amazing, your friendship and humour will be missed by not only myself but for many on these forums...

Being able to see all sides of your character has been something that will forever last in my memory...from your cheeky comments, your moderator speeches to the sad times of your grandfather and of course finding the rights words to give to your wife Nell on that special occasion.... :) im going to miss you around here for sure

Take care of yourself, Nell and those kiddies of yours :) :) Dont be a stranger make sure you come in to the stagea section and let us know how everything is going :)

love ya heaps : :(:thumbsup:

P.S if you ever come to WA make sure you come and see us

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...