Jump to content
SAU Community

Recommended Posts

i have not had the chance to dig around in the shed yet guys but i wil endeavour to do it tomorrow nite and see what i can find.

i have just finished a 14hr day and will be another 3 in a row the same so please bear with me k :D

cheers oxford

They're handy if it's a cold and rainy night, and the inside of the car is getting steamy 'cos the heater is on. You can open the windows slightly and not have the rain getting in.

Heat + aircon = hot dry air, no fogging up :D

hiya again all.

the part numbers from local nissan dealer and pricing are as follows.

part# NI-G3800-0V500 Description ROOF VISOR price $268.40 plus GST which works out to be $295.25.

that is what i paid for them ex-japan on the 18/6/06 at local nissan dealership, took them around 4-5weeks to get here but saved a ton on freight charges.

cheers oxford

I'm mainly after a set because I'm sick of the wind noise I get on both sides when on the highway etc. I'm guessing this is because of the pillarless door frames. For you guys that do have them does it make a difference with the wind noise etc. And yeah cleaning my windscreen and having the water comming in was a pain but my FMIC fixed that....no windscreen washer bottle :)

Edited by Mr_RS4

still get a little bit of wind noise when in a heavy wind or have turned the wick up a bit on the back roads etc :(

but all in all they are a good investment as they give a lot of other benefits too

cheers oxford

http://page18.auctions.yahoo.co.jp/jp/auction/w10673072

they sometmes come up in Yahoo auctions if you have a

means of purchasing & delivery to Australia. The price

looks good too...

I have a passenger side set only if anyone wants to throw money at me. I dunno what they are worth so PM me with an offer if ur interested. I may or may not throw in a lap dance in my new sequined mankini....

edit - *SOLD*

*FEELS CRUSHED THAT LAP DANCE OFFER WAS REFUSED...*

Hey Phil.. Was that 1.8m long measured from one end to the other, following the curve?

If they were in a box, how long do you think it would be? 1.5m?

HI

They are 1.8m following the curve or 1770mm tip to tip

To put them in a box it would need to be about 1.8m L x 250mm W x 50mm D

I could see both fitting in a box this size with a bit of packing

Hope this helps

Thanks

Phil

  • 8 months later...

Hi There,

sorry to drag up an old topic but is it hard to fit these? I have managed to secure (if I want) a set and given Im missing a drivers side and suffer the normal problems (window down water running in, in mornings and wind/driving rain leakages) I would like to grab them and fit them. The ones I can get have no clips and there seems to be nothing on the car itself. Is the mounting hardware if any common fitting clips or are they stagea specific?

Thanks for any help you all can give

Kenny

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let large companies that are making money off selling kits do the preliminary engineering for you. If they all do -10, then that is all you'll ever need. 
    • Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
×
×
  • Create New...