Jump to content
SAU Community

Recommended Posts

depends on cams and head work auto or manual what rear housing?

but to make over 400kw at the wheels i would use a gt42r did one on a friends car and in comes on full boost at 4500rpm and has made and easy an 600hp on 98 fuel

Link to comment
https://www.sau.com.au/forums/topic/179427-t04z/#findComment-3269515
Share on other sites

What's your intended purpose for the car? ie strip / circuit / just a quick street car

Will the RB26 be in a manual or auto car equipped car?

TO4z with a 0.84 will do 400rwkw at a lower boost level than a 3540 with a 0.84 however I'd guess would reach full boost approx 600-800rpm later. My TO4z reaches full boost around 4600-4800 rpm in thrid.

Link to comment
https://www.sau.com.au/forums/topic/179427-t04z/#findComment-3269531
Share on other sites

What's your intended purpose for the car? ie strip / circuit / just a quick street car

Will the RB26 be in a manual or auto car equipped car?

TO4z with a 0.84 will do 400rwkw at a lower boost level than a 3540 with a 0.84 however I'd guess would reach full boost approx 600-800rpm later. My TO4z reaches full boost around 4600-4800 rpm in thrid.

i get 20psi in 4th gear just before 4000rpm

garrett t04z with 0.84 and 6-boost manifold

Link to comment
https://www.sau.com.au/forums/topic/179427-t04z/#findComment-3271453
Share on other sites

  • 2 weeks later...
i get 20psi in 4th gear just before 4000rpm

garrett t04z with 0.84 and 6-boost manifold

thats actually better then what i expected...what cams you have? I bet those 6boost manifolds relli do work huh?...Im thinking of getting the larger 1.x a/r for outright power. Its a rb25 with cams and headwork....Will the turbo drop off boost during gear changes? How much power varation between the .8x and 1.x a/r?

cheers

Link to comment
https://www.sau.com.au/forums/topic/179427-t04z/#findComment-3299436
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...