Jump to content
SAU Community

Engine Builders In Vic

ardie

By ardie,
in Victoria

 Share

Recommended Posts

ardie Experienced

ardie

Posted
Posted

Hey guys and gals of SAU, well if you have seen my thread with the recent results on the dyno then you may also be aware I want to build an engine to maximise the potential of my turbo setup as well as give me some peace of mind when I hit the loud pedal and when I take it for a thrash at the track.

Basically I'm after any information, experiences, knowledge or recommendations you guys have for me as I’ll readily admit I don’t know much about places to go, hence I need your help. I have chatted with a few workshops but I would like to hear some non bias (ok well probably more like LESS bias) opinions and recommendations from you guys.

To keep the peace, I’m not going to mention who I have and haven’t chatted too as I don’t want this to turn into a workshop war thread, nor do I want to play favourites. If you have anything negative could you please PM me as I am still interested, however I am well and truly opposed to slandering others names in the public forum.

Cheers

Ryan

Link to comment
https://www.sau.com.au/forums/topic/179554-engine-builders-in-vic/
Share on other sites
  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

dan.1337 Proficient

dan.1337

Posted
Posted

racepace is nice, but if you don't own an rb26 i think its pretty hard to get work done on your car. it seemed to me that they preferred to work on rb26's which is unfortunate as they're a friendly bunch of ppl there who seem to konw their stuff.

ardie Experienced

ardie

Posted
  • Author
Posted
Isn't Ray your tuner/mechanic??

Why not have a chat with him??

Hahaha remember in my 1st post how I said I have already chatted with some people............well yeah he MAY have been one of them >_< . Anyway, thanks for all the information so far guys. Basically what I really want to do is gather as much information from all the reputable engine builders in Vic, along with all the info I can gather from the forum and compile an outline of what I want for my rebuild as I know some places do things differently to others. The way I see it, I'll be able to "filter" out the necessary and unnecessary parts of the build and come to the best possible conclusion on what I do and do not need if that makes sense to you guys (it did in my head)

Jetdat Veteran

Jetdat

Posted
Posted
racepace is nice, but if you don't own an rb26 i think its pretty hard to get work done on your car. it seemed to me that they preferred to work on rb26's which is unfortunate as they're a friendly bunch of ppl there who seem to konw their stuff.

not sure about your experience but i never had any problems getting work done to my rb25, in fact Ben always comments its great working on my car being one of the best looked after cars he has seen.. >_<

ferni Grand Master

ferni

Posted
Posted
Hahaha remember in my 1st post how I said I have already chatted with some people............well yeah he MAY have been one of them >_< . Anyway, thanks for all the information so far guys. Basically what I really want to do is gather as much information from all the reputable engine builders in Vic, along with all the info I can gather from the forum and compile an outline of what I want for my rebuild as I know some places do things differently to others. The way I see it, I'll be able to "filter" out the necessary and unnecessary parts of the build and come to the best possible conclusion on what I do and do not need if that makes sense to you guys (it did in my head)

Don't expect the builders to give away all their secrets....

And yes Benno prefers to work with GTRs... but it doesn't hurt to ask, if he likes you, you may get lucky :D

JAGR33 Grand Master

JAGR33

Posted
Posted
not sure about your experience but i never had any problems getting work done to my rb25, in fact Ben always comments its great working on my car being one of the best looked after cars he has seen.. :ermm:

Have a heard about your car, Ben speaks very highly of it.... :laugh:

Roy Grand Master

Roy

Posted
Posted
not sure about your experience but i never had any problems getting work done to my rb25, in fact Ben always comments its great working on my car being one of the best looked after cars he has seen.. :ermm:

LOL...as opposed to me. I think mine is more like the car John Candy drove in Uncle Buck :laugh:

buck4.jpg

buck5.jpg

I think the big bonus with the likes of Racepace and RE Customs is that you are using the person who built the engine to install and tune the engine. You make life hard for yourself using a certain engine builder, then to get it installed by your local mechanic or yourself. Then tuned by someone different again.

If the end result is less then you hoped its hard to pick if its the build, the installation or the tune. I always think the tuner will do a better job when they know exactly what it is they are tuning, and they know it has the right fuel pump, injectors etc etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...