Jump to content
SAU Community

Recommended Posts

Yeah i do the same as N15MO, $2 at carlovers sometimes its $3.

Because you got to watch em.

When you use the high pressure soap it takes half ur bloody time to come out and when you want to wash it off it takes half the time for the soap to clear out and you have to put more money in to wash the rest of the soap off Grrrrr.

Edited by subzeroR33
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

sure you can - what are they going to do? send you on your way?

although if there are people waiting i'll usually have coins going in. it would be annoying waiting for someone who is not paying. you could always soap it up while your waiting for other cars...

My car is dirty...cruise to boobs wash?

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

Don't talk to me about that boob wash!

A few months back, I wanted to pass a few trucks on Abbotsford Rd. took the inside lane and planted my foot... almost collected a pink mazda 121 with 'Nude Carwash' plastered all over it!

my bad for passing on the inside. now EVERY time I drive that way, I'm on the lookout.

Andy, Noel, looking for a full report! :pics or ban

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

rofl. I dont even know where it is pear. besides, today is not a good day for a car wash. it would be covered in road splash by the time i got home.

I dont need to see flat boobs that bad. :laughing-smiley-014:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You wanna know how I know you are gay?

You will go and watch knuckle dragger's drive in straight lines at the drop of a hat but don't want to see flat boobs :rolleyes:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You didnt call me gay when i f**ked you last night. "Give it to me BIG GUY" wasnt it?? :laughing-smiley-014: :laughing-smiley-014:

You are confusing me with Shane again! And I really doubt he said BIG

So sad how old age senility effects people :thumbsup: ha ha

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

hey guys i just bought my car and it was sitting at a wharf or some crap for a year and is really dirty and i tryed cleaning at the sar wash and even again at home and itstill pretty bad. where and how much would it cost to get a full detail and bring up the coliur and a engine detail??.

thanks

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

I tend to go to the Car Lovers on Logan Rd at Underwood later on at night through the week.

There's never a queue so you can take as long as you like and chamois in the bay under the lights. There's no staff there at night either to kick you out for bucket-washing or taking a muddy fourby through etc.

There's also a servo within walking distance if you need change! :)

yeah i drive past that one often.. lots of lots ther and a vacuum too i think.. how much is it for a rinse with the Pressure hose?

My only advise. Go to Carlovers if you don't want to pay too much, do it yourself NEVER use the brush unless its on the wheel arches of your muddy 4wd. By a decent wash mit and microfibre chamois so as to not induce swirls.

I have found a certain carwash at a certain Albion location that induces swirls and then offers you details to remove them...how nice they are.

If you want to see swirls, click on the link in my sig and find the black evo with 15,000kms on it and see what bad car washes can do...

some cleaning wax should work for u.. unless it went past the clear coat.. has it.?

no i dont think i have its just really dirty and has alot of sratchs. but yea ill be trying a polish and wax soon and ill see how i go.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...