Jump to content
SAU Community

Recommended Posts

Hopw the hell do you do it?

I don't care if youc all me a noob etc, but i don't know.

I'm not talking about leaving 11's on the ashphalt.

I'm talking about how you keep the rear wheels spinning whilst stationary.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/181218-how-do-you-do-a-burnout/
Share on other sites

OK, so basically...

On the strip, depending on whether your car is auto or manual...

Auto - One foor firm on the break and then other on the accelerator (try not to rev car above 4000rpm)

Manual - Dump Clutch to get wheels spinning, then begin to apply the break

On the street - Drive like a normal road user!!! save tyre shreading for the track....

none of this hoon behaviour shit as it gives Skylines a bad name!

Another way you can do it is hold the brake on with ur right foot then use your heel of your right foot to work the accelerator. Have the car in like first gear and hold some revs with your right heel then let the clutch out reasonably quick.

Use more or less brake with your right foot so that you hold the car still but not so much brake that you stall the motor.

Yeah but as above you are best keeping that to the track.

Na you dont use handbrake. Your skyline is RWD unless a GTR so you only want the front brake on to hold the car still. There is a thing you can buy called a line locker which connects up with the brake lines to stop pressure getting to the rear brakes so when u put you foot on the brake only the front brakes will work.

This is however not legal on street cars.

Ideally you want no braking on the back wheels so that you can do stoppies easyier.

the easiest way is the heel/toe trick.

just keep it at about 5000rpm. if you are running streety tyres there is no need to do a big smoke burnout. just enough to get the water off is all. if you are running slicks then you need to get heat into them so a bigger burnout is better. that is where changing into second helps. you get the tyres spinning faster which creates more heat.

the handbrake only works the rear wheels so there is no point using it for the burnout. you can use it to load the motor up on the start line though if you are in a manual.

i wouldn't try starting in second unless you have a good clutch or crap tyres.

well thats what i did for several minutes on a skid pan and looked back over the vidoe and it sounded like a noob who was just burrying the pedal...

at the drags u dont want to be bouncing off the limiter......its got noob written all over it......i know cause i used to do it....

OK, so basically...

On the strip, depending on whether your car is auto or manual...

Auto - One foor firm on the break and then other on the accelerator (try not to rev car above 4000rpm)

Manual - Dump Clutch to get wheels spinning, then begin to apply the break

On the street - Drive like a normal road user!!! save tyre shreading for the track....

none of this hoon behaviour shit as it gives Skylines a bad name!

Thanks mate.

And i don't do it on the street.

To be honest, i need to learn how to drive the car before i even start trying to act like i know how to drive.

The reference up there was just so you guys know what i meant :laughing-smiley-014:

Now i can afford it, i'll stick to the tracks and skidpans to be a HOON :)

dump 2nd gear, hit the brakes sit on 7,000rpm and shoot flames :).. thats if i do one that is :P

or if u wana look cool dump 1st play with it a bit, hit 2nd and limo for around 50m :D

www.youtube.com/lthlrb

Edited by LTHLRB

If you are in the wetbox its quite easy. No need to dump the clutch then reach for the brake pedal. Just heel and toe your loud and brake pedal, Lightly on the brake is all you need, second gear, a enough revs to be around boost and slip the clutch. If your diff works well you wont go left or right so concentrate primarily on your tacho. Just float the revs below the limiter till you feel the tyres start to bite. You are now good to go.

Dont snap your foot off the throttle, ease it off whilst taking your foot from the brake. Easier on the car that way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...