Jump to content
SAU Community

Recommended Posts

My Toyo RA1 are shot. Now with over 250rwkw i am braking traction in 2nd gear under boost.

What tyres do you run and does it hold traction in 2nd gear with over 250rwkw? Can normal street tyres do it or do i need to run semi slicks again?? Over $400 a pop, they arent cheap. I heard Nankung's arent bad in the dry, but will they hold the skyline down?

rofl nankangs... they about $130 a pop for a 17" 225 which is cheap

i have them all round on my car and the rears break traction coming onto boost in 1st and JUST hold on in second

im running standard turbo too, dyno'd at just over 200rwkw so unless you got some 265s on there i dont think theyll hold

mate toyo t1r's are great but pricey....i have hankook k104 sports which arnt too expenseive and they hold pretty good....holds 2nd hitting boost...but not first....thats with 205kw

haha yeah i had 255/50/16s on my old GTR rims :) 16x8, worked quite well actually :( i was surprised

Bridgestone Potenza GIIIs are good too, although wear out quite fast

Toyo Proxies are alright as well, just depending on your budget, go for eitehr or those 3

My R32 has almost 250rwkw and I use Federal 595,s which are great for traction, but its torque thats the real problem, if you have heaps of torque then you will spin tyres pretty easily no matter what you use.

You could keep using UHP street tyres but you will probably find that you will get the same result from most of them, if you use semi slicks you will get more traction but semi slicks wont really reach max grip levels on the street as they wont heat up enough.

You could use something along the lines of the Federal 595RS which is more of a street semi slick (not R compound) with a very soft compound and lots of rubber on the road, check them out at www.federaltyres.com.au.

Yeah heard about those Federal's RS, they seem around the $400 mark as well. I'll shop around.

Yeah torque is the problem. Running high boost, she comes on pretty hard in the middle and thats where the problem is

Im running 255/40/17, i dont think a slight size increase will hold it down

He had 265 17x9

He now has 295 30 R20 20x10

More to do with the better quality rubber overall, but still fat.

1JZ GTE VVTI on 1.1bar, manual has a shit tin of torque due to VVTI, so it does have issues, hence the wider rubber.

look at your alignment (static and dynamic), RA-1's should hold that sort of power when hot. Have you looked at changing cradle angle to inprove traction? we just fitted Super pineapples to the drift car and have found a BIG gain in traction over the std ones.

we run 3mm total toe in

.2-1deg neg depending on track

adjust traction arms to suit ride height (these reduse toe change during suspensiontravel)

Cradle angle increased by about 20mm (front down)

look at your alignment (static and dynamic), RA-1's should hold that sort of power when hot. Have you looked at changing cradle angle to inprove traction? we just fitted Super pineapples to the drift car and have found a BIG gain in traction over the std ones.

we run 3mm total toe in

.2-1deg neg depending on track

adjust traction arms to suit ride height (these reduse toe change during suspensiontravel)

Cradle angle increased by about 20mm (front down)

Yeah the RA1's definately hold it down in 2nd gear but they are well and truely past their use by date. Looking for some cheaper replacements but looks like i will have to use R series tyres.

Hey Robo how's it going. Im running the Nankang nsII's on the back in a 255 on 18's. That's the widest i could go due to the offset of the rims. They are not to bad on very grippy roads but generally do break traction in second with 260kw. So i think you might be dissapointed with these tyres. Hope this help's. :cheers:

  • 1 month later...
NO TRACTION!! u got a 1.88 second 60ft time!! r u just f@*kin round or wot??

Read the post, my tyres are shot!!! :whistling:

Anyway ended up getting to Falken Azenis RT615. There still new and a little bit skatey, might test them out this weekend

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've searched fairly extensively among Japanese websites but found nothing really like those skirts in your photo. The closest I got was Origin Labo side skirts however they look more 'complete' in that they have a finishing piece or tab at the rear of the skirt so it blends into the bodywork, unlike the one in your pic. For that reason I'd say the skirts in your pic could be adapted from another car and they didn't include that tab piece, or those skirts aren't copied from an existing skirt but an original design. Sorry I can't help out in regard to ID'ing/sourcing them
    • Wonder if JB Weld sponsored the event lol
    • There's a big difference between a car built with millions of dollars in R&D, and someone like yourself taking a normal sporty road car, and making it 5 times more powerful. At the same time, get a modern sports car, and you can turn them up towards the 1000hp mark a lot easier too. Also, give that Lambo another 20 odd runs, and chances are it too may break something.
    • There isn’t really a cheap upgrade here. If someone made a decent, bolt in 6 speed that holds some grunt, it would do very well. The 5 speeds suck. You can put a - OSG 5 speed gear set into it. Ratios are tall so it zaps the “zing” out of it. Had one, busted it. - PPG 5 speed gear set synchro or dog’s. Ratios are even taller. - An overpriced Getrag. Nice to drive, expensive to source now. - A sequential of some sort. Expensive, very expensive. How many times do you pop a 5 speed before you throw the toys out of the cot?  
    • Yes, fair call. I don't have any special love for super/hyper cars but it was impressive to watch the Lambo line up against successive skylines without any problem at all. 
×
×
  • Create New...