Jump to content
SAU Community

Recommended Posts

Hey guys

was just wondering if it would be possible to get my license in SA while living in vic.

over there it works as so

get your l's at 16

hold your l's for 6months minimum, get 50 hours practice, and get your p1s at 16years and 6 months

p1s for a year and p2s for 2 years.

could I get my license over in sa??

so i could drive over here when im 16 and 6months

what would be required

ie would i need a residential address in SA.

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/182138-getting-your-license-in-sa/
Share on other sites

I just did NSW to VIC... Was told by vicroads I had to have residential address in VIC (not for 12months, though i already had a NSW one)

Also I only had 3 weeks to change it over since moving here, so i guess if you get booked in VIC then get pulled over several weeks,months later you could get done for it somehow.

Just wait in good time

lol true true guys

probably not going to happen but thought it hey, you never know.

must be possible though??

wouldn't it be possible for me to get my p's in sa at 16 and 6 months, them move my residential address back to vic, but still retain my license, or get something like an international license??

or would i have to apply for a vic license??

i know police aren't stupid, but techniclly it wouldn't be anything illegal if it was possible...

my mate did it. used to live in adeliade but had been in melb for years, got a bank statement sent to an old neighbours house when he was visiting back there, got his p's while he was 17 then came back to melb with them....there's a way you can get an extension for 3 months as well so you do that and you can have em for a fair while

My friend did this recently to get pass these new turbo, V8 rules. I think he said he only had to be a resident for 3 months in SA. Once the 3 months went by, he went to SA to get his licence. The next day he came back to Melb and drove. He's now living in Melb, but he is still 'living' in SA.

What he told the cops when he first got pulled over was that he was trying to sell the car and they let him off. He told me if he knew the trouble to get his licence in SA, he wouldn't have done it. He gets to drive a turbo car on his Ps so I think it would've been worth it.

^^^^

thats how i was thinking of doing it

i would be "living" in sa except i would be in melbourne most of the time ;)

for the 3 months thing i guess i could just write down that im living at ....... when im 16 so that i can pass this law.

i guess i could use excuses like im down here seeing family or trying to sell the car etc. if i get pulled over, but i don't plan to drive like a knob so i shouldn't really have any problems

unless i drive a skyline or something...

Swapping licenses around states is easy. Getting you license in a state you don't actually live in is slightly harder, if you have friends or family there makes it much easier though. Not sure of how long you have to have been "living" there, I think it varies from state to state, ring up and find out. Driving in a state on a different states license also isn't an issue, holiday, divorced parents, work, the list is endless. There are plenty of reasons why you could legitimantley be found driving every other week in Vic on a SA license, same as driving a Vic registered car on SA license or vice versa.....

As for the length of time you have been living in a state to first get your license there I do believe you have to show proof, ie. 3 months of letters being sent there....but a good scanner and laser printer work wonders these days....anyway thats my dogeyness for the day :)

My friend did this recently to get pass these new turbo, V8 rules. I think he said he only had to be a resident for 3 months in SA. Once the 3 months went by, he went to SA to get his licence. The next day he came back to Melb and drove. He's now living in Melb, but he is still 'living' in SA.

What he told the cops when he first got pulled over was that he was trying to sell the car and they let him off. He told me if he knew the trouble to get his licence in SA, he wouldn't have done it. He gets to drive a turbo car on his Ps so I think it would've been worth it.

Till the police pull him over, then note down they spoke to him etc.

Then do it again 3-4 months later, and then fine him for driving illegally.

Its illegal to live in a state (eg. Vic) permanently, but have an interstate licence (eg. SA). The law requires you change it over unless you have a good enough reason to justify it like business where your a contract worker on a 3 month contract or whatever.

If you do not spend sufficient time in SA, and that requires proof, then expect to be fined for trying to play the law.

Not sure what happens if they catch you again, likely cancellation or a heftier fine.

You cant just "feed" excuses every time you get pulled over.

It doesn't work and i know a couple friends who were pinned for it after they were pulled over twice (randomly) in 3 weeks.

Yeah, but when you drive a car rego'd in Vic, and have a license in SA... and are logged time and time again being pulled over...

How long do you think the police will be "fooled" for? :)

Not long, i assure you. The law is well within its rights to question it, the evidence suggests your lying. You would have to prove otherwise.

im a truck driver that does 3500-4000k's a week and raely get pulled over (in my 33 or truck) as long as you are doing everything legaly and driving a clean stock car then you should only get pulled over a minimal amount of times.

Till the police pull him over, then note down they spoke to him etc.

Then do it again 3-4 months later, and then fine him for driving illegally.

lol, so? they have no grounds whatsoever to fine you. how do they know weather or not you have been here for those 4 months.

im guessing that if i was to drive a car registered in SA it would be MUCH easier also.

and i also don't plan to get a high-performance car for the street on my p's anyway, gotta get some experience.

anything else i should know???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...