Jump to content
SAU Community

Recommended Posts

Sorry guys, i am having too much fun driving it. Its on a basic low boost run in tune at the moment. 330 rwhp at 6900 and .8 bar of boost. Its a ton of fun to drive. Still so much left in it its just ridiculous, The power curve hasnt even bugun to taper and thats with no timing and a rich tune.

I told mick I wanted 400 rwkw at 25 lb of boost. "you wont need that much boost on this engine to get that figure" was his response. !!WOOOOOOOOT!! :D:D

I think i may reevaluate my street boost too. I was going to run it around 18 lb but after seeing how willing it is to make the numbers i will probably settle for about 1 bar.

Off to drive it again. Cyall. :):):)

OH! the redline will be 85000 rpm on full tune.

  • Replies 187
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Sorry guys, i am having too much fun driving it. Its on a basic low boost run in tune at the moment. 330 rwhp at 6900 and .8 bar of boost. Its a ton of fun to drive. Still so much left in it its just ridiculous, The power curve hasnt even bugun to taper and thats with no timing and a rich tune.

I told mick I wanted 400 rwkw at 25 lb of boost. "you wont need that much boost on this engine to get that figure" was his response. !!WOOOOOOOOT!! :D:D

I think i may reevaluate my street boost too. I was going to run it around 18 lb but after seeing how willing it is to make the numbers i will probably settle for about 1 bar.

Off to drive it again. Cyall. :):):)

OH! the redline will be 85000 rpm on full tune.

what power did mick reckon ull hit up on 1bar then..?

good to see noel.. and redline 85000rpm?

OH! the redline will be 85000 rpm on full tune.

Welcome to the 8000 + RPM club :)

IT has a really nice Midrange Noel! with Roughly the same response as my car with a turbo several sizes bigger! Should be good, just get those brakes working properly! :)

Nice work mate. Well done. Have you done anything with the cam gears?? Mine are still set on 0 but want the change them to get some more midrange.

My 25 made 399rwkw on 17psi reving to 8k. Will be rutuned in a few weeks for 22-25psi and 8500 rev limit. Thats if it holds together :)

jetcar_w.jpg

Not sure if these do 85000rpm but im sure they spin pretty fast...

So how long for the run in, til you go supersonic i mean?

Your not the only one who has put the lines to the wastegate backwards before also :)

Nice work mate. Well done. Have you done anything with the cam gears?? Mine are still set on 0 but want the change them to get some more midrange.

My 25 made 399rwkw on 17psi reving to 8k. Will be rutuned in a few weeks for 22-25psi and 8500 rev limit. Thats if it holds together :)

thats sweet mate. The cam gears are untouched at this stage, Not going there till the power tune.

Let me know how your hi boost tune goes, it sounds very similar to my setup. 399 at only 17 lb is awesome. Good luck with it.

My engine setup

Am using 1000cc injectors, splitfire coils, custom fuel rail with twin entry, 1 walbro intank pump feeding surge tank then 2 044s to fuel rail, Tomei cams, 85mm throttlebody, Greddy plenum (badge not on in pic) twin T3/T4 turbos, 48mm external gate, Haltech E11v2 and the list goes on and on...

Engine.jpg

Edited by WHITER33GTS-T

Hey noel! looks n sounds sweet brother, mine unfortuantly has not even begun its transformation. i calling the mechanic today, you've inspired me!

Look at ur face, it says it all congratulations noel, i will hope to see you down the bank when i get finished..

Hame

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...