Jump to content
SAU Community

Recommended Posts

Hi there, I am wanting to use this setup slightly differently. I want to display video on screen while leaving the audio to playing CDs (am using a grom unit for audio which retains OEM steering controls)

My question is. When grounding cont1 which forces the nav screen to display the aux video signal, does it also switch the OEM head unit to aux or leave it alone?

If it does not does anyone know of a more permanent trick to disabling the auto aux audio feature? (I did see a post about leaving cont1 grounded before startup which left the sound alone but this would force me to keep cont1 grounded which I would rather have switchable)

Hope all of the above makes sense :)

Greg

Sent from my PadFone 2 using Tapatalk HD

When grounding cont1 which forces the nav screen to display the aux video signal, does it also switch the OEM head unit to aux or leave it alone?

In my Bose equipped coupe, when I ground cont1 to display the reverse camera on the nav screen, the audio isn't affected - ie the radio (or whatever is runnimg at the time) stays on.

When grounding cont1 which forces the nav screen to display the aux video signal, does it also switch the OEM head unit to aux or leave it alone?

In my Bose equipped coupe, when I ground cont1 to display the reverse camera on the nav screen, the audio isn't affected - ie the radio (or whatever is runnimg at the time) stays on.

Excellent! That's exactly what I was hoping would happen. That plan is to use my cell phone via Bluetooth as the audio source. But when i want navigation I plan to connect it via a micro USB to HDMI adapter, then convert that signal to rgb NTSC format and pass it through the aux port by using the cont1 grounding trick. In theory this should never effect the audio stream and allow me to retain the OEM steering controls.

Will post an update with pics if everything goes as planned.

Cheers

Greg

Sent from my PadFone 2 using Tapatalk HD

  • 3 weeks later...
  • 3 weeks later...
  • 5 months later...

Woman: beret, mid calf skinny skirt, shirt or tight sweater with round neck and long sleeves, mid high heel, small purse, all in cream/brown/beige/mauve/dead green; seamed stockings are nice or draw a line with an eyeliner/eyebrow pencil up the back of the calfThe classic style of the Air Max 95, which was inspired by the human body, is then covered in Medium Grey and Neutral Grey until it reaches the lace loops, which are done in Blue Spark to match the Air filled midsole. northface outlet The skin being the external layer and fleece used as a warm lining makes them feel comfortable and soft against bare feet.What color shoes could I wear with a gold shirt? The shirt is gold with your back out and I plan on wearing it with skinny jeans. north face outlet locations He killed Vivian to firm up the video alibi, which mentioned a subway push murder that happened then, hence the flowers.Johnson's forte and trademark are wryly observing cultural differences, primarily between the French and Americans, with truths and stereotypes flying out of characters' mouths on every page. Technicians begin by jackhammering the floor, and then setting down a layer of loose stone.

  • 2 months later...
  • 1 year later...

Hi Chris, all I need is reverse cam, can u give me the picture of where i can find the tv tuner box?

I can find the cord Video Component to VTR via

http://www.ebay.com.au/itm/CD-AUX-USB-Reversing-Image-Cables-for-Subaru-Forester-Radio-Changer-Hot-Sale-/251689952116?ssPageName=ADME:X:RTQ:AU:1123

Thanks,

  • 3 weeks later...

Hi Chris, all I need is reverse cam, can u give me the picture of where i can find the tv tuner box?

I can find the cord Video Component to VTR via

http://www.ebay.com.au/itm/CD-AUX-USB-Reversing-Image-Cables-for-Subaru-Forester-Radio-Changer-Hot-Sale-/251689952116?ssPageName=ADME:X:RTQ:AU:1123

Thanks,

send me the TUNER and I will modify it to suti a camera.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...