Jump to content
SAU Community

Recommended Posts

Ok just to let you in a on a little hint - Adam has a Stagea in our shop that we lodged a very long time ago with Dotars.

He has just had a new baby and needed a station wagon so we bought one and shipped it - now this is for him personally and his wife is a very tough woman (being nice here). He has been getting no end of grief about the time it has taken to comply the car from his wife - so he especially understands your frustration.

The worst thing that anyone can do is call DOTARS and give them the vin on their car and say it is taking too long, as this makes them look at your vin and if they are visiting Sydney or wherever the compliance shop is they will stop in and check the car. Now if they find one thing that does not comply on the car (it could be a missing seatbelt tag or say Nismo taillights) they will hold the car up for at least 6 weeks while they go through the paperwork response from the RAWS shop (this is referred to as DI - discussion item). Other things cause DI's such as using a fullstop in the wrong place (yes that simple) and some VIS (vehicle inspection certificates) are 8 + pages long it is more than frustrating for me personally as I do 80% of our paperwork. I often spend more time fixing up a DI that actually complying a car - just to make DOTARS happy.

We all know minor things make ZERO difference in the real world but these guys are like Highway Patrol cops and seem to get off on slowing things down. I prefer to get cars in and out quick as that is how we make money - the longer a car sits the less space we have to work and in practice the less money we make.

If one of the DOTARS staff goes on Holidays his / her work just piles up.

Perfect example - we had 13 cars sitting in bonded storage @$20 per day due to the fact we were unable to get VIA's from the second week of Dec to the 1st week of Feb. Why might you ask ? Well they had the majority of their staff off on annual leave and ran a skeleton staff just to get the VICS processed. By the way we paid the $260 per day not the clients as we try to be fair with everybody.

Yes I called to ask what was happening and was told "the rules state you can't ship the car until you get the VIA", which is correct but if you sit a car on the wharf in Japan you will also accumulate storage fees.

It is a calculated risk if you ship prior to getting the VIA but 90% of the time it works ok.

I hope this explains things a little better.

Haha sounds like a shit of a job!
These DOTARS people sound like they don't mess around and do seem worse than the defect police.

I haven't bothered calling DOTARS because as Kristian said the people who call them seem to wait the longest.

Thanks for being so transparent about what's been going on and taking the time to reply in here.

I understand where Dodgyimports is coming from, but taking shortcuts is part of the reason why shit cars make it to our shores in the first place. Omission of repairs etc and then for sale at Edward Lee's as mint condition

yes - massive amount of sarcasm in my post.

it's disgusting to see cases like this - and frustrating to see that those whose jobs are to manage and regulate this area continue to ignore this issue - all the while they make things harder for the good guys too. is there ANYTHING they ARE getting right?

yes - massive amount of sarcasm in my post.

it's disgusting to see cases like this - and frustrating to see that those whose jobs are to manage and regulate this area continue to ignore this issue - all the while they make things harder for the good guys too. is there ANYTHING they ARE getting right?

Lol, sorry Dodgy, my sarcasm detector was not working yesterday!

Any more info on yours?

Yeah I spoke with them on Thursday and was told fri or mon it should be ready. Haven't heard a word yet although i am in Japan so not sure if this is barring calls. I know don't believe it has anything to do with dotars delays. It's more to do with workshops taking more cars than they can handle!

Edited by BigWillieStyles

Yeah I spoke with them on Thursday and was told fri or mon it should be ready. Haven't heard a word yet although i am in Japan so not sure if this is barring calls. I know don't believe it has anything to do with dotars delays. It's more to do with workshops taking more cars than they can handle!

They always blame DOTARS if they cant keep up of if there plate alocation has run out.

Seems like a few of us are all having the same delays so it will probably be a huge holdup with DOTARS.

But has anyone had a car arrive in the last 3 months and have it pass compliance easily?

My car arrived in Sydney on the 1st of December & next week will pass the 5 month mark for total time spent importing.

must be absolutely spewin !

although no alternative, you guys have patience that's for certain.

when you cant do anything about it then you cant waste energy on emotion

did you not got any info on timeframe when doing business with importers?

meaning is this common this wait and see how long it takes. Most govt agency's have SLA's

I know of the downsizing of all government departments but this is beyond belief.

most departments have not been slashed yet

Approved vehicles link

RAWS site says it can take up to 20 days (1month)

So what has DotaRS said about their timeframe/delay ?

Complaints to [email protected]

Edited by Sinista32

When it arrived I was originally given a time frame of about 2-3 weeks normally. After a month passed I followed up and was told it would be another week. Then after that it would be a couple of weeks. Next time frame was that it would be about a month and most recent was that it would be last week.

Most of my family and friends have just given up asking when I get my car because I keep telling them "next week"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...