M35 Info

[slippylotion]

the generally unplug the switch on the stalk. there is a small cutout at the back of the indicator stalk, remove and plug it back in.

if you have an aero model with the driving lights in the front bar, the 'I/II' switch next to the headlight height adjustment toggles between the bumper lights and the ones in the headlight unit.

Thanks for that. The car hasn't been complied yet but I'll check that switch tomorrow. I did find today that the drivers side fog light wasn't plugged in. I also had a problem with none of the lhs indicators working at all. After a few hours checking everything I found that someone in Japan had cut a wire behind the drivers kick panel, I joined it back up and now all indicators are working. Very weird as to why they cut it.

Edited July 13, 2011 by slippylotion

[zei20l]

aftermarket immobiliser i guess. id be checking ALL wiring down there and behind the steering wheel also.

if it hasnt been complied, then my solution wont work

[Cracksta]

ok so im picking up my RX Four (stock standard) from Edward Lee's in sydney with in the next week, after owning a W34 and loving it just curious to find out

1. Whats the best wheel combo to get (size and width)

2. is there a AUX 12V socket in the rear like on the W34?

will post up a some pic's when i pick her up from compliancing and registration

[zei20l]

please please PLEASE have the car throughly checked by an INDEPENDANT inspection place. a mechanic, hell anyone that knows anything about those cars.

if possible, dont buy it from there

anyway, 18 as a minimum i would get in wheel size

no there is no 12v output in the boot, unless the dealer (in japan) has fitted one

[bigkevracer]

Thanks for that. The car hasn't been complied yet but I'll check that switch tomorrow. I did find today that the drivers side fog light wasn't plugged in. I also had a problem with none of the lhs indicators working at all. After a few hours checking everything I found that someone in Japan had cut a wire behind the drivers kick panel, I joined it back up and now all indicators are working. Very weird as to why they cut it.

I'm willing to bet that you have, or had, the mirror covers with the LED indicators.

When I picked mine up from having the alarm replaced, the indicators weren't working on the LHS except the LED ones, which flashed quickly. Found the problem was a wire behind the drivers kick panel had been cut by the scotch lock they used to connect the LEDs in the mirrors to the indicator lines.

Soldered up, all good!

[Cracksta]

please please PLEASE have the car throughly checked by an INDEPENDANT inspection place. a mechanic, hell anyone that knows anything about those cars.

if possible, dont buy it from there

anyway, 18 as a minimum i would get in wheel size

no there is no 12v output in the boot, unless the dealer (in japan) has fitted one

had a mate who is a mechanic go over it with a fine tooth comb he has worked with quite a few m35's in the past another mate of mine works at a body shop and can pick resprays really well, this one came through very well amazingly. very straight and mechanically no issues, was f.o.b when i spotted it while searching around the area. (arrived 30th june) still had quarantine stickers on her

what width wheel is recommended? looking at 9-10 inches

[ironpaw]

had a mate who is a mechanic go over it with a fine tooth comb he has worked with quite a few m35's in the past another mate of mine works at a body shop and can pick resprays really well, this one came through very well amazingly. very straight and mechanically no issues, was f.o.b when i spotted it while searching around the area. (arrived 30th june) still had quarantine stickers on her

what width wheel is recommended? looking at 9-10 inches

9.5 max...I don't know anyone running 10's on our cars...

[Sunkist]

i think angus was running tens. but low offset so they stuck out like dogs balls.

[slippylotion]

Ideal sizes are 9+30 or 9.5+35 And I think it was 8.5+22 in the diameter your happy with. I found that the 9.5+30 only leaves about 3mm between rim and suspension link arm. I chose 9+30 as it sits the same in relation to the guard lip but has more room inside to the suspension arms.

[Sunkist]

if you wanted something abit "drift Spec"

you could probably go 9+25? should stick out about 5 mm, with some stretched tires and rolled guards. would look awesome! ive got 8+22 and i have about half an inch- 1 inch clearance to the guard which means i could space em out abit.

9+25 would look gooooood

[slippylotion]

9+30 sticks out about 3-4mm at the front and rear is flush. I have pics but can't upload using the phone.

[Sunkist]

oh really? im wrong then. mine are 8.5+22 and sit in abit.

[impul535w]

oh really? im wrong then. mine are 8.5+22 and sit in abit.

You have the plastic over fenders so wouldn't they increase the amount of offset you could run as you have an extra bit of space to fill out

[Sunkist]

you'd think so lol, but the plastic covers are just clipped into the stock fenders you have. so i cant run anymore offset than you.

although when i rolled my guards i did hack up the covers. and it came up great/

[ArdentEagle]

Am I reading this right that this will remove the speed limiter?

http://www.importmonster.com.au/view?url=http://page22.auctions.yahoo.co.jp/jp/auction/l78754808&thumb=http://f0.auctions.c.yimg.jp/f10batchimg.auctions.yahoo.co.jp/users/1/6/2/3/hksdirect-thumb-1309274693091949.jpg&title=HKS%20SLD%20type3%20N2%20M35%20VQ25DET

[Daleo]

Am I reading this right that this will remove the speed limiter?

http://www.importmon...20M35%20VQ25DET

Certainly looks that way

Don't mind charging for the privilege; do they?

[scotty nm35]

I have one here if you want it,..

[ArdentEagle]

I have one here if you want it,..

I need to get my mods done first to make it worth while. Problem i've found is no one wants to touch e-manage over here in W.A,.....................I'm stuck as to what to do.

[scotty nm35]

I need to get my mods done first to make it worth while. Problem i've found is no one wants to touch e-manage over here in W.A,.....................I'm stuck as to what to do.

Fcon perhaps?

[Sydsyd]

9.5 max...I don't know anyone running 10's on our cars...

mate has 20"x10 and he wants to try to stick them on my car this weekend...gonna be lots of lol...

pics will be up when the fitting is done...