Jump to content
SAU Community

Recommended Posts

So I'm back in the Stagea game, have been away far too long. Moved to WA for a job i couldn't knock back. Have had two Series 2 C34's in the past, and have made the jump to the M35. I wanted the comfort as I drive upwards of an hour each day on a very long straight road... The X-trail I bought has as much balls as a newborn. So I needed something with a bit of power.

Here is a photo of the Stag...Currently getting repairs in Japland as some douche damaged in inbetween the auction yard and shipping yard. Luckily they took responsibility and Ben from j-spec is chasing it up for me.

08.jpg

01.jpg

Have a few things planned for the car already. Cloth interior, has the tv, hopefully it has cruise control?

Nope - no cruise control. They have a different Grill - with a radar thingo on it- someone correct me ifd i'm wrong !

BUT - being sneaky - I can see you have a cargo net in there- 1st pic in thru the back window, its mounted up on the roof lining! Good part to have- about $400 from Nissan!

Welcome to M35 ownership!

Don't know if this link will work, but:

http://translate.googleusercontent.com/translate_c?hl=en&rurl=translate.google.com&sl=ru&tl=en&twu=1&u=http://www.megazip.ru/ru/auto/nissan/view/41/51/1901/58621&usg=ALkJrhjSNEMtWOPWbuFbppaBt1897nQJdw

Can I remove "21082C" from part "21082".. The nuts that hold on the mount for the radiator fan? Can I remove the entire fan without screwing up any engine timing and stuff?

the engine timing is ALL electronic.

did you undo the 4 small nuts to get the fan off? if you need to turn it, loosen a belt, or just turn the motor with a socket and breaker bar from the larger wheel at the bottom. make sure the transmission is in neutral.

ok and after looking at that diagram, yes it all comes apart. just make sure you do it all up properly. the bit the fan is bolted to is a clutch that expands as the water temp goes up thus turning the fan faster.

Awesome, thanks mate. Radiator is IN. Fricking marathon effort I tell ya.

I have read it somewhere before, but on the standard radiator, which of the holes for the Transmission "cooler" is in and which is out?

Tried following them back to the transmission but can't see shit.

Guess I could start the car up but it's kind of in bits at the moment..

i would say its bidirectional :) as long as the fluid is passing through the radiator its gonna be heated whichever direction it flows.

however, i THINK one of the pipes is slightly larger than the other. but dont quote me on that. that may have been one of my aftermarket hoses

Quick Question- To those with Transmission coolers, what size are the fittings- 3/8's or 5/16ths?

Looking to get one to cope with Transgo, and the turbo kit- prob just go the Repco PWR unit. 28cm x 15cm

So I'm back in the Stagea game, have been away far too long. Moved to WA for a job i couldn't knock back. Have had two Series 2 C34's in the past, and have made the jump to the M35. I wanted the comfort as I drive upwards of an hour each day on a very long straight road... The X-trail I bought has as much balls as a newborn. So I needed something with a bit of power.

Here is a photo of the Stag...Currently getting repairs in Japland as some douche damaged in inbetween the auction yard and shipping yard. Luckily they took responsibility and Ben from j-spec is chasing it up for me.

08.jpg

01.jpg

Have a few things planned for the car already. Cloth interior, has the tv, hopefully it has cruise control?

Hmm is that a stock car with aero front bar?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...